Loading ...
Loading ...
Loading ...
Review this chart to find do-it-yourself solutions for minor performance problems. Any service
needed, other than those described in this owner's manual, should be performed at a Sears
Service center.
WARNING
Disconnect electrical supply before performing maintenance to the vacuum
cleaner, Failure to do so could result in electrical shock or personal injury,
Vacuum cleaner won't 1.
start. 2.
3,
Poorjob of dirt 1.
pick-up, 2,
3.
4.
5,
6.
7,
8.
9.
10.
Vacuum cleanerstarts but 1.
cuts off, 2.
3.
Power-Mate"wig not 1.
runwhen attached.
2.
3.
4,
5,
Vacuumcleaner picksup 1,
moveablerugs -or- 2.
Power-Mate"pushes
too hard.
Lightwon't work, 1.
Cordwon't rewind. 1.
2.
Vacuumcleaner leaves 1.
marks on carpet.
Unpluggedat walloutlet.
Trippedcircuitbreaker/blownfuse
at householdservicepanel.
Loosehoseelectricalconnections.
Fultorcloggeddust bag.
Cloggedairflowpassages.
Dirtyfilters.
Wrong pile height setting.
Opensuctioncontrol.
Holein hose.
Worn Power-Mate"agitator.
Worn or broken belt.
Dirtyagitator or endcaps.
Canisterhood open.
Hoseor hoodelectrical connections.
Trippedoverloadprotectorin
Power-Mate'.
Trippedthermalprotector
in canister.
Power-Mate=connections
unplugged.
Wornorbroken belt.
Dirtyagitatoror endcaps.
Trippedoverloadprotectorin
Power-Mate"
ON/OFF Switchis not in
CARPET positon.
Wrongpileheightsetting.
Suction too strong.
1. Plug infirmly, pushON/OFFswitch to ON.
2. Resetcircuitbreakeror replacefuse.
3, Reconnect hose ends.
1, Change bag.
2, Clear airflow passages.
3. Changefilters.
4. Adjust setting.
5. Adjustcontrol.
6. Replacehose.
7. Changeagitator.
8 & 9. See BELTCHANGINGAND AGITATOR
CLEANING,
10. Closeandlatch hood.
1.
2.
3.
1,
2&3.
4,
Checkconnections,reconnecthose ends.
Removeanyitemsthatmay be caught
orjammed, then reset. Ifvacuum cleaner
starts and stopsagain,cleanagitatorend
endcaps, thenresel.
Resetthermal protector.
Plug infirmly.
See BELTCHANGINGAND AGITATOR
CLEANING.
Removeanyitemsthatmaybe caught
orjammed,thenreset. [f vacuumcleaner
startsandstops again,cleanagitatorand
end caps,thenreset.
5. Push ON/OFFSwitchto CARPET
position.
1. Adjustsetting.
2. Opensuction control.
Burnedout lightbulb. 1. Change lightbulb.
Dirty powercord. 1. Cleanthe powercord.
Cordjammed. 2. Pull outcord and rewind.
Wrongvacuumingpattern. 1. See VACUUMINGTIPS.
18
Loading ...
Loading ...
Loading ...