Loading ...
Loading ...
Loading ...
EN
W415-2007 / D / 04.28.21
31
maintenance
Ensure the door latch closes and engages properly.
5 6
7
SET SCREW
HINGE PIN
Lift the door onto the appliance bottom hinge.
Reinstall the 3 screws of the hinge block
assembly and loosen the top set screw. Close the
door to check alignment.
Replace the screws and bottom hinge block on the
appliance. Insert the hinge pin and install the set
screw loosely.
HINGE
PIN
8
HINGE
BLOCK
Replace with the screws and hinge blocks
provided. Reinstall the hinge block assembly.
Reinstall the set screw loosely.
9
To align the door, loosen the set screws. Rotate
the hinge pins clockwise or counter-clockwise to
raise or lower the door. Tighten the set screw. Door
adjustment is strictly trial and error; you may need
to perform this adjustment a few times until the
desired angle is attained.
Loading ...
Loading ...
Loading ...