Loading ...
Loading ...
Loading ...
21
USING THE REMOTE CONTROL UNIT (SOME MODELS ONLY)
MODELS WITH REMOTE CONTROL
• Point the remote control at the receiver on
the air-conditioner. The remote control
must be no more than 5 metres away from
the appliance (without obstacles
between the remote control and the
receiver).
• The remote control should be handled
with extreme care and respect. Do not
drop it, expose it to direct sunlight, or
leave it near sources of heat.
DESCRIPTION OF THE REMOTE CONTROL
17) "ON/OFF" button
18) "MODE" button
19) Programmed operation/ decrease/
increase temperature button
20) Pulsante “TIMER”
21) Pulsante selezione di velocità di venti-
lazione (MAX/MED/MIN)
22) °F/°C switching button
Replacing the batteries
• Remove the cover on the rear of the
remote control;
• Replace the old batteries with two new
LR03 “AAA” 1.5V batteries, inserting them
correctly (see the instructions inside the
battery compartment);
• Replace the cover.
If the remote control unit is replaced or
discarded, the batteries must be removed
and disposed of in accordance with current
legislation as they are harmful to the envi-
ronment. Do not mix alkaline, standard
(zinc-carbon) and rechargeable (nickel-
cadmium) batteries.
Do not throw the batteries in the fire as they
could explode or leak dangerous liquids.
TURNING THE APPLIANCE ON
Plug the appliance into the mains.
Press the ON/OFF button (17) (when turned on, the air conditioner starts operating in the same
mode as when it was turned off).
Press the MODE button (18) to select the required mode
COOLING
DEHUMIDIFYING
FAN ONLY
On the control panel, the light corresponding to the selected mode comes on.
For air conditioning/dehumidifying/fan only settings and programming the timer, see page 19-20.
MAX 5 metres
17
19
20
22
21
18
Loading ...
Loading ...
Loading ...