Loading ...
Loading ...
Loading ...
CAREANDCLEANING
RemovableParts(cont.)
3. Pull out. 1. Push element
back into
receptacle to
2. Lift ul:
1 inch,
The element notch should --l['_
engage the maintop tab when _=_
seated properly,
TO REMOVE
1. Be sure the controls are in the OFF
position and the elements are cool
before attempting to remove them.
2. Push the element back into
the receptacle slightly, lift about
1 inch, and pull it straight out.
r[/_ CAUTION: Do not lift ,, "_
J_ the element more than 1 . |
_Lifting the element more than 1" |
_can damage the receptacle, |
Jcausing the element not to lie flat_
it pluggedbacki : j
3. Lift out the drip bowl.
TO CLEAN THE DRIP BOWL
For brown food stains - Use
dishwashing detergent, warm water,
plastic scouring pads, mild abrasive
cleaners, soap-filled scouring pads,
or ammonia. Clean drip bowls after
each use. Rinse and dry well. Foods
that are not removed can cause
permanent stains that cannot be
removed. For heavily soiled bowls,
place them in a covered container (or
a plastic bag) with 1/4cup of ammonia
to loosen the soil, then gently scrub
the bowl with a plastic scouring pad.
operate the cooktop
elements without the drip J
bowl in place, Scorching of
the cooktop, burning of wiring
insulation and loss of energy
will occur.
TO REPLACE THE UNIT
1. Place the drip bowl into the
opening and make sure the
receptacle is visible.
2. Slide the element firmly
back into the receptacle, lower
it onto the drip bowl, and push
forward to engage the top.
25
Loading ...
Loading ...
Loading ...