Loading ...
Loading ...
Loading ...
16
!
"
INSTRUCTIONS FOR THE USER
OVEN SIDEWALL GRIDS (g. 11)
For an effective cleaning of the oven side-guide rails,
these can be extracted unscrewing knurled nuts (G).
To t the rails back in their place, rst insert rear pins in
holes and then secure them with the knurled nuts (G).
OVEN DOOR REMOVAL
(g. 12)
The oven door can be removed to give easier access
to the oven when cleaning.
To remove, proceed as follows:
• Open the oven door and insert rivet or nail (R) in the
hole (F) of the hinge.•
Partially close the door, forcing it upwards at the
same time to free stop tooth and hinge sector.
• Once the hinge is free, pull the door forwards tilting
it slightly upwards to free sector.
• To reassemble proceed in the reverse order, paying
attention to the correct position of sectors.
REPLACING THE OVEN LAMP
Ensure the appliance is switched off before replacing
the lamp to avoid the possibility of electric shock..
In the event one or both oven lamps need replacing, the
new lamps must comply with the following requisites:
15 W - 230 V~ - 50 Hz - E 14 - and must be resistant to
high temperature (300°C).
The appliance can have two different types of lamp
holder:
• Lamp holder type 1 (g. 13): Draw out the side
guide rails as described above.Then, remove the
glass protection cap (V) from the bulb socket,
lifting it with a screwdriver placed between the cap
and the oven wall and replace the lamp (L). Fit the
accessories back in reverse order.
13
!
"
12
!
11
Loading ...
Loading ...
Loading ...