Loading ...
Loading ...
Loading ...
15
Before installing the water supply line,
you will need:
• Basic Tools:
•
•
•
DO
NOT
•
•
To Connect Water Supply Line To Ice
Maker Inlet Valve:
ferrule (sleeve) into valve inlet and
DO NOT
water supply line to rear panel of
turns) behind refrigerator as shown and
Plastic Water
Tubing to Ice
Maker Fill
Tube
Steel
Clamp
Ferrule
(Sleeve)
Copper
Wire Line
Water
Valve
Bracket
Valve Inlet
Water Valve
Copper Water Line
from Household
Water Supply
(Include enough tubing in loop to allow
moving refrigerator out for cleaning.)
Brass
Compression
Nut
WARNING
To avoid electric shock, which can
cause death or severe personal injury,
disconnect the refrigerator from
electrical power before connecting a
water supply line to the refrigerator.
IMPORTANT
NOTE
CAUTION
To Avoid Property Damage:
• Copper tubing is recommended for the
water supply line. Water supply tubing
made of ¼” plastic is not recommended
since it greatly increases the potential for
water leaks. Manufacturer nor retailer
will be responsible for any damage if
plastic tubing is used for supply line.
• DO NOT install water supply tubing
in areas where temperatures fall
below freezing.
• Chemicals from a malfunctioning
softener can damage the ice maker.
If the ice maker is connected to soft
water, ensure that the softener is
maintained and working properly.
Connecting Household Water Supply To Refrigerator
NOTE
Loading ...
Loading ...
Loading ...