Home
Bookmarks
Home
Bosch
Bosch SHEM78W52N/01 User Manual
Bosch SHEM78W52N/01 dishwasher
User Manual
For SHEM78W52N/01.
PDF File Manual
,
45 pages
,
Download pdf file
Table of contents
en-us Operating instructions
( Safety Definitions 5
( IMPORTANT SAFETY INSTRUCTIONS 6
Æ Causes of Damage 9
* Getting Started 10
, Rinse Aid 12
- Loading the Dishwasher 13
. Detergent 22
/ Dishwasher Cycles 24
0 Dishwasher Cycle Options 25
1 Operating the Dishwasher 28
2 Care and Maintenance 32
3 Troubleshooting 36
4 Customer Service 40
â¡ Statement of Limited Product Warranty 41
( Safety Definitions
Safety Definitions
9 WARNING
9 CAUTION
NOTICE
Note:
( IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
To reduce the risk of fire, electrical shock, or serious injury, observe the following:
Risk of fire, electrical shock, or serious injury
9 WARNING
Risk of injury or death!
9 WARNING
Risk of injury!
9 WARNING
Risk of electrical shock or fire!
9 WARNING
Health hazard!
GROUNDING INSTRUCTIONS
9 WARNING
Risk of electric shock!
Safe Operation
9 CAUTION
9 WARNING
Risk of injury!
Child Safety
Proper Care and Maintenance
9 WARNING
Risk of explosion!
NOTICE
9 WARNING
State of California Proposition 65 Warnings!
Æ Causes of Damage
Causes of Damage
NOTICES
* Getting Started
Getting Started
Appliance overview
Operating panel
Dishwasher interior components
Display indicators
Menu overview
Setting
Factory setting
Description
, Rinse Aid
Rinse Aid
Note:
Adding rinse aid
NOTICE
1. Open the rinse aid dispenser 9* by pressing on the latch of the lid and pull it open.
2. Add liquid rinse aid to the dispenser 9* until it is full. Do not overfill.
3. Close the lid. Lid must be fully closed until it clicks in order to seal.
4. Wipe up any excess rinse aid that may have puddled when the dispenser reservoir is full.
NOTICE
Setting the amount of rinse aid used
Setting
Amount
1. Press the On/Off button (.
2. Hold down the function key # and press the Start button P until the display 8 indicates Å¡:â¹x (x can be any number). Release both buttons.
3. Press the function key # until the display 8 shows §:â¹â .
4. Press the function key 3 to select the desired setting.
5. Press the Start button P to save the setting.
Turning off rinse aid indicator
NOTICE
- Loading the Dishwasher
Loading the Dishwasher
Dishware material
Note:
Recommended
Not Recommended
Loading the racks
For best dishwashing results, observe the following when loading the dishwasher:
NOTICE
Loading the upper rack
Note:
Loading the lower rack
Recommended loading pattern
12 place setting
Lower rack 9"
Upper rack 12
Note:
Third rack 1*
Additional loading pattern
10 place setting
Lower rack 9"
Upper rack 12
Note:
Third rack 1*
Loading the silverware basket
9 WARNING
Risk of injury!
The Double Flex silverware basket
Side by side
Back to back
Note:
Unloading the dishwasher
Note:
Adjusting the height of the rack
With silverware basket
Upper rack
Lower rack
9.4 in (24 cm)
13.4 in (34 cm)
10.4 in (26.5 cm)
12 in (30.5 cm)
11.4 in (29 cm)
11 in (28 cm)
With third rack
Upper rack
Lower rack
7 in (18 cm)
13.4 in (34 cm)
8 in (20.5 cm)
12 in (30.5 cm)
9 in (23 cm)
11 in (28 cm)
RackMatic®
1. Pull the upper rack out of the dishwasher until it stops.
2. To lower the rack, push the RackMatic® lever inward.
3. To raise the rack, hold the basket on the sides of the upper rack and lift it up.
Note:
Rack accessories
Flip tines
Third rack
Cup shelves
Removing/Installing third rack
Removing third rack 1*
1. Pull out third rack all the way (1).
2. Lift upper rollers over the stopper hooks of both rails (2).
3. Pull third rack out forward and upward so the the holding hooks and the lower rollers of the rack slide over the stopper hooks of both rails (3).
Installing third rack 1*
1. Pull out third rack rails all the way (1).
2. Insert third rack at an angle. Make sure that the stopper hooks of both rails slide in between the holding hooks and the lower rollers of the third rack (2).
3. Slide third rack in and lift the upper rollers over the front stopper hooks of both rails (3).
4. Push in third rack (4).
Removing/Installing upper rack with Rackmatic®
Removing upper rack 12
1. Pull out upper rack all the way (1).
2. Lift front rollers over the stopper hook of the rail (2).
3. Pull out upper rack forwards and upwards so that the upper and lower rollers of the rack slide over the stopper hooks of both rails (3).
Installing upper rack 12
1. Pull out upper rack rails all the way (1).
2. Insert upper rack at an angle. Make sure that the stopper hooks of both rails slide in between the upper and lower rollers on the rear side of the rack (2).
3. Slide upper rack in and lift the upper rollers over the front stopper hooks of both rails (3).
4. Push in upper rack (4).
. Detergent
Detergent
NOTICE
Note:
Wash Cycle
Hard Water/ Heavy Soil
Medium Water/ Medium Soil
Soft Water/ Little Soil
Adding detergent
1. If the detergent dispenser 92 is still closed, actuate the locking bar 9: to open it.
Note:
2. Pour detergent into the dry detergent dispenser 92 only. Add detergent. Do not overfill the detergent dispenser.
Note:
3. Close the lid by placing the finger on the lid as shown. Slide the lid closed and press down firmly until it clicks.
Tip:
/ Dishwasher Cycles
Dishwasher Cycles
Wash cycle
Recommended use
Possible wash cycle option
Note:
Note:
The Energy Guide label was based on the Normal soil sensing cycle as follows: The unit was tested without any rinse aid (liquid) in the rinse aid dispenser 9*. A single dose of detergent was inserted into the detergent dispenser 92, with no detergent...
0 Dishwasher Cycle Options
Dishwasher Cycle Options
Delay
Half Load
Delicate
Sanitize
Extra Dry
Wash Cycle Information
Note:
Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/ANSI Standard for Residential Equipment for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, to imply that all cyc...
1 Operating the Dishwasher
Operating the Dishwasher
9 WARNING
Risk of injury!
Protection against unintentional operation
This function will be activated when:
Note:
Operating the touch buttons
AquaSensor
AquaSensor
Switching the appliance on
1. Turn the water supply on fully.
2. Press the On/Off button (.
3. Press Start button P.
Note:
Time display
Delay start
To set Delay start:
1. Press On/Off button (. Select a cycle.
2. Press Delay button @ until the displayed time corresponds with your requirements.
3. Press Start button P to activate Delay start.
To cancel Delay start:
1. Press Delay button @ until Å:â¹â¹ is indicated on the digital display 8.
2. Press Start button P to save setting.
Note:
Wash cycle end
To change the signal volume:
1. Press the On/Off button (.
2. Hold down the function key # and press the Start button P until the display 8 indicates Å¡:â¹x (x can be any number). Release both buttons.
3. Press the function key # until the display shows âº:â¹Æ.
4. Press the function key 3. Each time the button is pressed the set value increases by one level; when it reaches the value âº:â¹â, the display jumps back to âº:â¹â¹ (off).
5. Press the Start button P to save the setting.
Auto power off
To change the setting:
1. Press the On/Off button (.
2. Hold down the function key # and press the Start button P until the display 8 indicates Å¡:â¹x (x can be any number).
3. Release both buttons.
4. Press the function key # until the display 8 indicates Ë:â¹x.
5. Press the function key 3 until the display corresponds with your requirements.
6. Press the Start button P.
Switching off the appliance
Short time after the end of the wash cycle:
1. Press On/Off button (.
2. Turn off water supply.
3. Remove the utensils when they have cooled down.
9 WARNING
Risk of injury!
Interrupting the wash cycle
9 CAUTION
1. Press On/Off button (.
2. To continue the wash cycle, close the door and press On/Off button ( again.
Note:
Terminating the wash cycle (Reset)
Terminating the wash cycle
1. Press and hold Start button P for approximately 3 seconds until the display reads â¹:â¹â.
2. Wait about 1 minute while the dishwasher drains.
3. Press On/Off button (.
Changing the wash cycle
Child Lock (panel lock)
To set the panel lock:
1. Start the desired wash cycle.
2. Hold down the button that says âChild Lockâ underneath it for approximately 3 seconds until the display reads ââ.
ââ will be indicated now if any button is pressed and the program will not be reset.
Intensive drying
1. Press the On/Off button (.
2. Hold down function key # and press Start button P until the display 8 indicates Å¡:x (x can be any number).
3. Release both buttons.
4. Press function key # until the display 8 indicates the factory set value Å¡:â¹â¹.
5. Press function key 3 to switch the intensive drying feature on Å¡:â¹â or off Å¡:â¹â¹.
6. Press Start button P to save setting.
2 Care and Maintenance
Care and Maintenance
Overall condition of the dishwasher
NOTICE
9 WARNING
Filters
Filter components
The filter system 1b consists of three parts.
Cleaning intervals
Your filter system may need to be cleaned when:
Cleaning interval
Use this setting,
Note:
To check or clean the filter system:
1. Unscrew the Large Object Trap as illustrated and remove the entire filter system.
2. Remove any residue and clean filters by rinsing under running water. Note: do not use abrasive brushes or steel wool, etc., as they may damage the filter.
3. Reinstall the filter system in reverse sequence and lock into place by screwing the Large Object Trap until the marking arrows align.
Spray arms
Check spray arms 1:, 1R for grease and limescale deposits. If you find such deposits:
Drain pump
Large food remnants in the rinsing water not retained by the filters may block the waste water pump. In this case:
Note:
Preparing your unit for vacation
NOTICE
Winterizing your unit
NOTICE
3 Troubleshooting
Troubleshooting
Problem
Cause
Action
Note:
Note:
Note:
Note:
Note:
Note:
Note:
--------
4 Customer Service
Customer Service
1. Call us at 1-800-944-2904
2. Contact Customer Service from our web site: www.bosch-home.com/us or www.bosch-home.ca
3. Contact your installer or the Bosch Authorized Service Contractor in your area.
4. Write us:
â¡ Statement of Limited Product Warranty
Statement of Limited Product Warranty
What this Warranty Covers & Who it Applies to:
The limited warranty provided by BSH Home Appliances Corporation (BSH) in this Statement of Limited Product Warranty applies only to Bosch® dishwashers (âProductâ) sold to you, the first using purchaser, provided that the Product was purchased:
How Long the Warranty Lasts
Extended Limited Warranty
BSH also provides these additional limited warranties:
Repair/Replace as Your Exclusive Remedy
Out of Warranty Product
Warranty Exclusions
The warranty coverage described herein excludes all defects or damage that are not the direct fault of BSH, including without limitation, one or more of the following:
How to Obtain Warranty Service
Page 1/45
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Contents
Table of Contents
Search
Previous
Next
Troubleshooting
Bookmarks
en-us
Operating instructions
fr-ca
Notice d'utilisation
Dishwasher
SHEM78W52N SHEM78W55N
SHEM78W56N
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 11545287_shem78w52n-01.pdf
File size: 3.78 MB
File Language: English
Pages: 45
Author: Bosch
File created: 2016-10-10
Published:
2022-07-03
Updated: 2023-05-03
Download File
Other documents for Bosch SHEM78W52N/01
The following documents are available:
User Manual
User Manual - (English)
Read Online
|
Download pdf
Installation Instruction
Installation Instruction - (English)
Download
Specifications
Brand:
Bosch
Model: SHEM78W52N/01
Category:
Dishwashers
See other models:
WFMC5301UC/15
SHE3AR72UC/07
SHX863WB5N/01
WFMC3301UC/01
SHE3AR75UC/22
Related Products
Bosch SHEM78W55N/01
Bosch SHXM78W52N/01
Bosch SHEM63W52N/01
Bosch SHPM78W52N/01
Bosch SHEM78W52N
Bosch SHPM78W54N/01
Bosch SHXM78W55N/01
Bosch SHPM78W55N/01
Bosch SHEM63W55N/01
Bosch SHEM63W56N/01
Bosch SHPM78W56N/01
Bosch SHSM63W52N/01
Bosch SHE878WD2N/01
Bosch SHEM78W56N
Bosch SHEM78W55N
Table of Contents
×
Table of contents
3
en-us Operating instructions
3
( Safety Definitions 5
3
( IMPORTANT SAFETY INSTRUCTIONS 6
3
Æ Causes of Damage 9
3
* Getting Started 10
3
, Rinse Aid 12
3
- Loading the Dishwasher 13
3
. Detergent 22
3
/ Dishwasher Cycles 24
3
0 Dishwasher Cycle Options 25
3
1 Operating the Dishwasher 28
3
2 Care and Maintenance 32
3
3 Troubleshooting 36
3
4 Customer Service 40
3
â¡ Statement of Limited Product Warranty 41
3
( Safety Definitions
5
Safety Definitions
5
9 WARNING
5
9 CAUTION
5
NOTICE
5
Note:
5
( IMPORTANT SAFETY INSTRUCTIONS
6
IMPORTANT SAFETY INSTRUCTIONS
6
READ AND SAVE THESE INSTRUCTIONS
6
To reduce the risk of fire, electrical shock, or serious injury, observe the following:
6
Risk of fire, electrical shock, or serious injury
6
9 WARNING
6
Risk of injury or death!
6
9 WARNING
6
Risk of injury!
6
9 WARNING
6
Risk of electrical shock or fire!
6
9 WARNING
6
Health hazard!
6
GROUNDING INSTRUCTIONS
7
9 WARNING
7
Risk of electric shock!
7
Safe Operation
7
9 CAUTION
7
9 WARNING
7
Risk of injury!
7
Child Safety
8
Proper Care and Maintenance
8
9 WARNING
8
Risk of explosion!
8
NOTICE
8
9 WARNING
8
State of California Proposition 65 Warnings!
8
Æ Causes of Damage
9
Causes of Damage
9
NOTICES
9
* Getting Started
10
Getting Started
10
Appliance overview
10
Operating panel
11
Dishwasher interior components
11
Display indicators
11
Menu overview
11
Setting
11
Factory setting
11
Description
11
, Rinse Aid
12
Rinse Aid
12
Note:
12
Adding rinse aid
12
NOTICE
12
1. Open the rinse aid dispenser 9* by pressing on the latch of the lid and pull it open.
12
2. Add liquid rinse aid to the dispenser 9* until it is full. Do not overfill.
12
3. Close the lid. Lid must be fully closed until it clicks in order to seal.
12
4. Wipe up any excess rinse aid that may have puddled when the dispenser reservoir is full.
12
NOTICE
12
Setting the amount of rinse aid used
12
Setting
12
Amount
12
1. Press the On/Off button (.
13
2. Hold down the function key # and press the Start button P until the display 8 indicates Å¡:â¹x (x can be any number). Release both buttons.
13
3. Press the function key # until the display 8 shows §:â¹â .
13
4. Press the function key 3 to select the desired setting.
13
5. Press the Start button P to save the setting.
13
Turning off rinse aid indicator
13
NOTICE
13
- Loading the Dishwasher
13
Loading the Dishwasher
13
Dishware material
13
Note:
13
Recommended
13
Not Recommended
14
Loading the racks
14
For best dishwashing results, observe the following when loading the dishwasher:
14
NOTICE
14
Loading the upper rack
14
Note:
14
Loading the lower rack
14
Recommended loading pattern
15
12 place setting
15
Lower rack 9"
15
Upper rack 12
15
Note:
15
Third rack 1*
15
Additional loading pattern
15
10 place setting
15
Lower rack 9"
15
Upper rack 12
15
Note:
15
Third rack 1*
16
Loading the silverware basket
16
9 WARNING
16
Risk of injury!
16
The Double Flex silverware basket
16
Side by side
16
Back to back
16
Note:
17
Unloading the dishwasher
17
Note:
17
Adjusting the height of the rack
17
With silverware basket
17
Upper rack
17
Lower rack
17
9.4 in (24 cm)
17
13.4 in (34 cm)
17
10.4 in (26.5 cm)
17
12 in (30.5 cm)
17
11.4 in (29 cm)
17
11 in (28 cm)
17
With third rack
17
Upper rack
17
Lower rack
17
7 in (18 cm)
17
13.4 in (34 cm)
17
8 in (20.5 cm)
17
12 in (30.5 cm)
17
9 in (23 cm)
17
11 in (28 cm)
17
RackMatic®
18
1. Pull the upper rack out of the dishwasher until it stops.
18
2. To lower the rack, push the RackMatic® lever inward.
18
3. To raise the rack, hold the basket on the sides of the upper rack and lift it up.
18
Note:
18
Rack accessories
18
Flip tines
18
Third rack
19
Cup shelves
19
Removing/Installing third rack
20
Removing third rack 1*
20
1. Pull out third rack all the way (1).
20
2. Lift upper rollers over the stopper hooks of both rails (2).
20
3. Pull third rack out forward and upward so the the holding hooks and the lower rollers of the rack slide over the stopper hooks of both rails (3).
20
Installing third rack 1*
20
1. Pull out third rack rails all the way (1).
20
2. Insert third rack at an angle. Make sure that the stopper hooks of both rails slide in between the holding hooks and the lower rollers of the third rack (2).
20
3. Slide third rack in and lift the upper rollers over the front stopper hooks of both rails (3).
20
4. Push in third rack (4).
20
Removing/Installing upper rack with Rackmatic®
21
Removing upper rack 12
21
1. Pull out upper rack all the way (1).
21
2. Lift front rollers over the stopper hook of the rail (2).
21
3. Pull out upper rack forwards and upwards so that the upper and lower rollers of the rack slide over the stopper hooks of both rails (3).
21
Installing upper rack 12
21
1. Pull out upper rack rails all the way (1).
21
2. Insert upper rack at an angle. Make sure that the stopper hooks of both rails slide in between the upper and lower rollers on the rear side of the rack (2).
21
3. Slide upper rack in and lift the upper rollers over the front stopper hooks of both rails (3).
21
4. Push in upper rack (4).
21
. Detergent
22
Detergent
22
NOTICE
22
Note:
22
Wash Cycle
22
Hard Water/ Heavy Soil
22
Medium Water/ Medium Soil
22
Soft Water/ Little Soil
22
Adding detergent
23
1. If the detergent dispenser 92 is still closed, actuate the locking bar 9: to open it.
23
Note:
23
2. Pour detergent into the dry detergent dispenser 92 only. Add detergent. Do not overfill the detergent dispenser.
23
Note:
23
3. Close the lid by placing the finger on the lid as shown. Slide the lid closed and press down firmly until it clicks.
23
Tip:
23
/ Dishwasher Cycles
24
Dishwasher Cycles
24
Wash cycle
24
Recommended use
24
Possible wash cycle option
24
Note:
24
Note:
24
The Energy Guide label was based on the Normal soil sensing cycle as follows: The unit was tested without any rinse aid (liquid) in the rinse aid dispenser 9*. A single dose of detergent was inserted into the detergent dispenser 92, with no detergent...
24
0 Dishwasher Cycle Options
25
Dishwasher Cycle Options
25
Delay
25
Half Load
25
Delicate
25
Sanitize
25
Extra Dry
25
Wash Cycle Information
26
Note:
27
Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/ANSI Standard for Residential Equipment for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, to imply that all cyc...
27
1 Operating the Dishwasher
28
Operating the Dishwasher
28
9 WARNING
28
Risk of injury!
28
Protection against unintentional operation
28
This function will be activated when:
28
Note:
28
Operating the touch buttons
28
AquaSensor
28
AquaSensor
28
Switching the appliance on
28
1. Turn the water supply on fully.
28
2. Press the On/Off button (.
28
3. Press Start button P.
28
Note:
28
Time display
29
Delay start
29
To set Delay start:
29
1. Press On/Off button (. Select a cycle.
29
2. Press Delay button @ until the displayed time corresponds with your requirements.
29
3. Press Start button P to activate Delay start.
29
To cancel Delay start:
29
1. Press Delay button @ until Å:â¹â¹ is indicated on the digital display 8.
29
2. Press Start button P to save setting.
29
Note:
29
Wash cycle end
29
To change the signal volume:
29
1. Press the On/Off button (.
29
2. Hold down the function key # and press the Start button P until the display 8 indicates Å¡:â¹x (x can be any number). Release both buttons.
29
3. Press the function key # until the display shows âº:â¹Æ.
29
4. Press the function key 3. Each time the button is pressed the set value increases by one level; when it reaches the value âº:â¹â, the display jumps back to âº:â¹â¹ (off).
29
5. Press the Start button P to save the setting.
29
Auto power off
29
To change the setting:
30
1. Press the On/Off button (.
30
2. Hold down the function key # and press the Start button P until the display 8 indicates Å¡:â¹x (x can be any number).
30
3. Release both buttons.
30
4. Press the function key # until the display 8 indicates Ë:â¹x.
30
5. Press the function key 3 until the display corresponds with your requirements.
30
6. Press the Start button P.
30
Switching off the appliance
30
Short time after the end of the wash cycle:
30
1. Press On/Off button (.
30
2. Turn off water supply.
30
3. Remove the utensils when they have cooled down.
30
9 WARNING
30
Risk of injury!
30
Interrupting the wash cycle
30
9 CAUTION
30
1. Press On/Off button (.
30
2. To continue the wash cycle, close the door and press On/Off button ( again.
30
Note:
30
Terminating the wash cycle (Reset)
30
Terminating the wash cycle
30
1. Press and hold Start button P for approximately 3 seconds until the display reads â¹:â¹â.
30
2. Wait about 1 minute while the dishwasher drains.
30
3. Press On/Off button (.
30
Changing the wash cycle
30
Child Lock (panel lock)
31
To set the panel lock:
31
1. Start the desired wash cycle.
31
2. Hold down the button that says âChild Lockâ underneath it for approximately 3 seconds until the display reads ââ.
31
ââ will be indicated now if any button is pressed and the program will not be reset.
31
Intensive drying
31
1. Press the On/Off button (.
31
2. Hold down function key # and press Start button P until the display 8 indicates Å¡:x (x can be any number).
31
3. Release both buttons.
31
4. Press function key # until the display 8 indicates the factory set value Å¡:â¹â¹.
31
5. Press function key 3 to switch the intensive drying feature on Å¡:â¹â or off Å¡:â¹â¹.
31
6. Press Start button P to save setting.
31
2 Care and Maintenance
32
Care and Maintenance
32
Overall condition of the dishwasher
32
NOTICE
32
9 WARNING
32
Filters
32
Filter components
32
The filter system 1b consists of three parts.
32
Cleaning intervals
33
Your filter system may need to be cleaned when:
33
Cleaning interval
33
Use this setting,
33
Note:
33
To check or clean the filter system:
33
1. Unscrew the Large Object Trap as illustrated and remove the entire filter system.
33
2. Remove any residue and clean filters by rinsing under running water. Note: do not use abrasive brushes or steel wool, etc., as they may damage the filter.
33
3. Reinstall the filter system in reverse sequence and lock into place by screwing the Large Object Trap until the marking arrows align.
33
Spray arms
34
Check spray arms 1:, 1R for grease and limescale deposits. If you find such deposits:
34
Drain pump
34
Large food remnants in the rinsing water not retained by the filters may block the waste water pump. In this case:
34
Note:
34
Preparing your unit for vacation
35
NOTICE
35
Winterizing your unit
35
NOTICE
35
3 Troubleshooting
36
Troubleshooting
36
Problem
36
Cause
36
Action
36
Note:
36
Note:
37
Note:
37
Note:
37
Note:
38
Note:
38
Note:
39
--------
39
4 Customer Service
40
Customer Service
40
1. Call us at 1-800-944-2904
40
2. Contact Customer Service from our web site: www.bosch-home.com/us or www.bosch-home.ca
40
3. Contact your installer or the Bosch Authorized Service Contractor in your area.
40
4. Write us:
40
â¡ Statement of Limited Product Warranty
41
Statement of Limited Product Warranty
41
What this Warranty Covers & Who it Applies to:
41
The limited warranty provided by BSH Home Appliances Corporation (BSH) in this Statement of Limited Product Warranty applies only to Bosch® dishwashers (âProductâ) sold to you, the first using purchaser, provided that the Product was purchased:
41
How Long the Warranty Lasts
41
Extended Limited Warranty
41
BSH also provides these additional limited warranties:
41
Repair/Replace as Your Exclusive Remedy
42
Out of Warranty Product
42
Warranty Exclusions
42
The warranty coverage described herein excludes all defects or damage that are not the direct fault of BSH, including without limitation, one or more of the following:
42
How to Obtain Warranty Service
44
Search:
×
Search