Loading ...
Loading ...
Loading ...
TIMER
(This function can only be used once a heat level has been selected ; see thermostat
section).
You must set the time prior to programming the Timer. To do this; turn the outer dial
of the timer in a clockwise direction until the time of the day (24-hour clock)
corresponds with the triangular marking. Example if it is 2pm (1400 hours) then set
the triangular mark in line with 14. One complete turn of the dial corresponds to 24
hours.
There are 96 “riders”, positioned around the dial, each rider represents 15 minutes.
Where all the “riders” are pushed to the outside of the timer the heater will be ON
continuously.
To set a specific time for example:
If you want the heater to be on from 9am to 1pm, then set all the riders from 9 to 13
(0900 hours to 1300 hours) to the outside of the rim and all other riders to the inside
of the timer. The unit will then turn on automatically at 9am and off again at 1pm.
WARNING: Take care in positioning your heater, using the Timer will
mean the heater will come on automatically. Fire may result if placed next
to combustible material.
Operating Your Heater
Loading ...
Loading ...
Loading ...