Loading ...
Loading ...
Loading ...
Aboutthe temperaturecontrols, vvvvw.GEAppliances.com
J
The temperature controls are preset in the factory at 37°t: for the
refrigerator compartment and O°Ffor the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
NOTE: Therefrigerator is shipped with protective film covering the
temperature contro/s, if this fi/m was not removed during installation,
remove it now.
Tochange the temperature, press and release tile
WARMER or COLDERpad. Tile SETlight will come
on and tile display will show tile set temperature.
To change tile temi)erature, tap either tile
WARMER or COLDERpad tlntil tile desired
temperature is displayed. Refrigerator temperatures
can be a(!justed between 34°F and 44°F and tile
fl'eezer temperatures can be a(!iusted between
-6°F and +6°E
Once tile desired temperature has been set,
the temperature display will return to the actual
retiigerator and fl'eezer temperatures after
5 seconds. Several a(!itlstments may be required.
Each time you a(!iust controls, allow 24 l/o/us
fin" tile reliJgerator to reach tile temperature
VO/Ihave set.
Toturn the cooling system off,tap tile WARMER pad
tot either tile reti'igerator or tile fl'eezer until tile
display sho_vs OFF.To turn the unit back on, press tile
COLDERpad tin" either tile refl_igerator or freezer,
The SETlight will illuminate on the side you
selected, Then press the COLDERpad again (on the
side where the S_'Tlight is illuminated) and it will
go to tile preset points of O°Ffi)r tile fl'eezer and
37°Flor tile reliiger:mn: Setting either or both
controls to OFFstops cooling in both tile fl'eezer
and refrigerator compartments, but does not shut
off electrical power to the retiigerato_:
PerformanceAir Flow System
Tile Perf0mmnce M_=Flow System is designed to
maximize temperature control in tile refrigerator
and ti'eezer compartments. This unique special
t_'ature consists of tile AJr Tower along tile top and
back walls of tile refrigerator and tile Mr Tunnel on
the bottom portion ot the fl'eezer rear wall, Placing
fi)od in fl'ont of tile louve_ on these components
will not affect pedinmance. Mthough tile Mr Tower
and tile Mr Tunnel can be removed, doing so Mll
affect temperature pe_ommnce. (For remowd
instructions, on-line, 24 ho/u_ a day, contact us at
_sv.GEAppliances.com or call 800-GE-CARES.
In Canada, contact us at _v.geappliances.ca or
call 1.800.361.3400.)
Loading ...
Loading ...
Loading ...