Chef CS902S 90cm Canopy Rangehood

User Manual - Page 3

For CS902S.

PDF File Manual, 4 pages, Read Online | Download pdf file

CS902S photo
Loading ...
Loading ...
E
F
F
G
D
RECOMMENDED INSTALLATION SEQUENCE COOKER HOOD OPERATION
Diagram D
Slide switch controls:
Replacing lamps:
Press button switch controls
Maintenance:
Diagram E
NOTE:
Install cooker hood body.
Determine working height, mark
wall to suit.
Install cover ue mounting
brackets.
Light switch:
Extractor fan switch:
Slide position I:
Slide position 2:
Slide position 3:
Ensure the appliance is switched off before carrying out
maintenance, to avoid any possibility of electric shock. Remove
grease lter to replace lamp. Replace with 40W (maximum) E14
candle lamp.
Light switch: Depress
light button to turn light
ON. Press light button to
turn light OFF.
Clean grease lters
every three to four weeks
maximum.
Greasy lters are a re
risk.
Remove the grease lters,
soak and agitate in hot
soapy water.
Rinse, drain and shake
well before replacing
lters.
Do not use oven cleaners
or other caustic materials.
Extractor fan switch
interlocked switching:
Select a fan speed,
depress button to turn
fan ON. Press button (O)
to turn fan OFF.
Fix duct transition to cooker hood
body.
Install internal exhaust duct to suit
installation type.
Best results are obtained by using a low fan speed for normal
conditions and a high fan speed when odours are more
concentrated. Turn the hood on a few minutes before you start
cooking. It should by left on after cooking for about 15 minutes or
until all odours have disappeared.
This product is tted with a safety cutout device. If the cooker hood
is installed to close to the cooktop, ambe cooking, operating the
cooktop without cooking utensils and blocked lters may activate
the safety cutout device. if the hood stops during operation, correct
the faults and allow time for the safety cutout device to reset, the
cooker hood will then function correctly.
Page 3
Diagram(s) F
Diagram G
Install bottom section of
telescopic ue cover.
Install top section of
telescopic ue cover.
This switch is used to turn the
light tted in the hood on and off.
Used to select fan speeds.
Fan speed Low
Fan speed Medium
Fan speed High
- - - - - - - - - - - - - -
- - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - - - - - -
IMPORTANT:
The Edison Screw lamps may have come loose
during transportation. Ensure that lamps are tightened rmly
into the socket before power is applied.
3
2
0
0
Loading ...