Loading ...
Loading ...
Loading ...
5
Lay Bucket inside of Base and screw on large nut.
Tighten with Philips screwdriver.
.To improve the stability , please fill the bucket
with Sand.
Step 3 – Attach Cylinder Housing to Base
Attach Cylinder Housing Loosely to Base with 8 pcs
M5X10 bolts.
Put the Plastic nut & Fastening piece through the post
in order.Put the Tabletop through the post as show.
Step 4 – Attach Post to Cylinder Housing top
Open the door, put post through the hole on the top of
Cylinder Housing.
Attach post to Cylinder Housing using 4pcs M6X10 bolts
and M6 nutVĭ[6PDOOIODWZDVKHUV
Step 5 – Tabletop Installation
Through the Fastening piece to the hole on the Tabletop.Hold
the t abletop using a hand and screw the Fastening piece to the
Plastic connecting anti-clockwise using the other one. Fasten the
Fastening piece.Screw the Plastic nut to the Plastic connecting
anti-clockwise. Fasten the Plastic nut.
Adjust the height of the Tabletop. Loose the Plastic nut and adjust
the Tabletop height of you want. Fasten the Plastic nut.
Put the Plastic connecting through the post as show.
Step 6 – Attach Reflector Studs to Screen Cover
.Insert 3 Reflector Studs & 3 Flat Washers.
.Tighten studs securely.
3 Req’d Reflector Studs
3 Req’d Large Flat Washers
Fill Sand
(For models without tabletop, skip to Step 6)
Loading ...
Loading ...
Loading ...