Loading ...
Loading ...
Loading ...
End-of-Cycle Signal. operates with any cycle.
The signal can be set anywhere between OFF and
LOUD, depending on the desired sound level. The
signal will sound just before the end of the cycle to
remind you to remove the clothes.
To stop the signal while sounding, tuna the signa
control to OFF or advance the Cycle Selector to
The signal should always be used when drying
polyester knits or pennanent press items which
should be removed as soon as the dryer stops to
help prevent setting of wrinkles.
)FF.
The signal should also be used with the
Extra Care Cycle.
Variable Signal
MED
0FF_LOUD
Polyester Knits & Permanent Press Drying Tips
• DO NOT OVERLOADm
Garments being dried or
dewrinkled should tumble freely.
• REMOVE CLOTHES
PROMPTLY--To help prevent
wrinkling, remove clothes from
the dryer promptly at the end of
the drying cycles.
• PLACE ON HANGERSm
Pennanent press and polyester
knit gannents look best if placed
on hangers after drying.
The Difference Between Automatic and Timed Drying
Automatic Drying
When using the Automatic Cycles, the
Automatic Dry Control system continually senses
the temperature of the air in the dryer drum. Wet
laundry keeps the air cool. When laundry is dry
enough (and the drum air warm enough) the heat tunas
off. When the air cools, the heat turns back on. This
off and on cycling may happen a number of times
(depending on the fabric, load size and cycle Selector
setting). The Cycle Selector advances (when the heat
is off) until it automatically turns off dryer.
Timed Drying
When using the Timed Cycles, you select the number
of minutes you wish the dryer to run and it turns off at
the end of this time period.
©
7
Loading ...
Loading ...
Loading ...