Loading ...
Loading ...
Loading ...
3 Use
13
3.4 Illumination
➤ Press the button to switch the illumination on.
➤ Repeatedly press the button to switch the illumination off.
Saturation indicator for grease filter
The button flashes after 40 operating hours. The saturation level is
reached and the grease filters must be cleaned.
Saturation indicator for the standard activated charcoal filter
The button illuminates after 160 operating hours. The saturation level is
reached and the standard activated charcoal filter must be replaced.
Activate:
➤ Switch off the appliance.
➤ Hold the button (doesn’t light up) depressed for at least 3 seconds.
– An acoustic signal is emitted.
– The button lights up, as long as it is pressed.
– The recirculation mode is activated.
Deactivate:
➤ Switch off the appliance.
➤ Hold the button (lights up) depressed for at least 3 seconds.
– An acoustic signal is emitted.
– The button light goes out.
– The recirculation mode is deactivated.
The illumination can be used independently of the extractor fan.
The saturation indicator is deactivated at the factory. If the appliance
is being used as a recirculation model, the saturation indicator must
first be activated.
Loading ...
Loading ...
Loading ...