Loading ...
Loading ...
Loading ...
Installation
38
Adjusting the minimum setting for LPG
Tighten the screw located at the side of the
cock rod clockwise all the way.
Lubrication of gas cocks
Over time the gas cocks may become
difficult to turn and get blocked. Clean them
internally and replace the lubrication
grease.
Burner and nozzle characteristics table
Overall dimensions
Location of gas and electrical connection
points.
Following adjustment to a gas
other than the one originally set in
the factory, replace the gas setting
label fixed to the appliance with
the one corresponding to the new
gas. The label is inserted inside the
nozzle pack (where present).
The greasing of the gas cocks
should be performed by
authorised persons.
1 ULPG 2.75 kPa AUX SR R UR int. UR est.
Nominal gas consumption (MJ/h)
4.0 6.5 10.8 3.2 14.0
Injector (1/100 mm)
54 68 88 48 100
2 NG 1.0 kPA AUX SR R UR int. UR est.
Nominal gas consumption (MJ/h)
4.5 7.5 12 4.0 14.0
Injector (1/100 mm)
90 120 155 81 170
A 40 mm
B 618 mm
C 124 mm
D 12 mm
Loading ...
Loading ...
Loading ...