Loading ...
Loading ...
Loading ...
5
Gently place the
air purier on its
side to expose
the lter
chamber cover.
Push the Button
toward arrow
direction to
unlock and open
the cover.
Pull the used
HEPA lter
out and insert
a new one.
2H 4H
8
H I I I III
2H 4
H
8H I II III
Product Specifications
4
CADR
Smoke: 153 m3/hr
Noise Level on High Speed
55dB(A) max
Fan Speeds
3
Power Consumption
38W
Getting Started
1. Gently place the air purifier on its side to
expose the filter chamber cover.
2. Open the cover following the instructions
in How to Replace the HEPA Filter on
page 5. Pull the filter out of the air
purifier and remove the plastic bag.
3. Insert the filter back into the unit and
close the cover.
4. Your unit is equipped with a True HEPA
filter that will last for approximately 12
months.
Operating Instructions
1. Place the unit on a dry, stable and firm
surface. Make sure not to block the top air
vent and air intake grille.
2. Plug unit into appropriate electrical outlet.
3. Select desired fan speed setting: III (Hi), II
(Medium) and I (Low) by pressing the ON/
OFF (
I II III
) button to cycle through the
speeds until it reaches desired speed setting.
4. Note: For optimum air filtration, it is
recommended to operate the unit
continuously on speed II (Medium). Its
heavy-duty motor was designed to provide
many years of use.
5. Important: Always turn off and unplug the
unit when not in use.
Care And Maintenance
Before cleaning the air purifier, turn off and
unplug.
Clean the exterior surface with a clean, damp
cloth.
The top air vent can be cleaned of dust with
a small, soft brush.
If you would like to clean the inside of the
filter compartment, ONLY use a dry, soft
cloth to wipe it down.
WARNING: Do not allow moisture to come into
contact with the main housing of the air
purifier.
NEVER use detergents, gasoline, glass
cleaner, furniture polish, paint thinner, or
other household solvents to clean any part of
the appliance.
How To Replace The Hepa Filter
It is recommended to replace the True HEPA filter every 8-12 months.
1. The Filter Replacement Indicator light (
I II III
) starts blinking when it is time to replace the filter.
Turn off and unplug air purifier. Replace the HEPA filter with a new one.
2. To replace:
3. Close and lock the cover. Place the air purifier on a flat surface.
4. Plug the unit into an electrical outlet. Reset the Filter Replacement Indicator by pressing and
holding the On/Off (
I II III
) and Timer (
I II III
) buttons simultaneously for 3 seconds until you hear
a beep and the light goes off.
*Replacement filters (SAPF0900) can be purchased through local service centres.
Troubleshooting
Problem Solution
Why is my unit not working?
Check if unit is properly plugged in and outlet is
working.
Make sure unit is turned ON.
Make sure the filter is properly installed.
Why is there a decrease in air flow?
Make sure nothing is blocking air intake grille and
filtered air outlet.
Check condition of the filters and replace if
necessary.
Check filter to remove any plastic wrapping/
packaging.
Why is the unit making a loud noise?
Make sure the unit is firmly positioned in place.
Open filter chamber cover and verify that any plastic
packaging was removed from the filter.
Loading ...
Loading ...