Loading ...
Loading ...
Loading ...
Wall
Note:
Oven Control Pad Features
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below,
OVEN
INTERIOR
LIGHT PAD
Used to turn
oven interior light
ON
CLOCK SET COOK TiME UP and DOWN ARROWS PADS Used ADD 1 MINUTE PAD Used to add 1 BAKE PAD--
PAD Used to PAD Used to along with the function pads to select minute to the Timer Countdown. This Used to select
set the time enter the length oven temperature, cook time, start time feature works with the Kitchen Timer the bake
of day. of the baking (when programming an automatic start only and does not affect any cook time function.
time. time), time of day, clean time and or start time functions. (some models).
minute timer.
TIMER SET/OFF PAD
Used to set or cancel
the minute timer. The
minute timer does not_...
start or stop cooking.
Also, TIMER SET/OFF
Pad is used to set the
® ® ®
iNDiCATOR
LIGHTS--
These lights
show which
feature is in
use.
BROIL PAD--
Continuous Bake _ _ _ _ Used to select
Feature. (Select_ ( Delay_ • Oven (_'_ _ the variable
\ _'_"" ] \ 2"" ] \_/ _ broil function.
SELECT CLEAN _ O Preheat ",_0"q_/ _
PADUsedtoselect DaorLooke, WARM&
the Self-Cleaning _ / _ HOLD PAD--
cycle. A 2, 3 or 4 hour _ /,,,mp__ _ Used to set the
Self-Clean time may _ / _ _ Warm & Hold
be selected (some / \ feature.
models). ........................................... _ ....................... . ............................ \ ..............
OVEN, PREHEAT & DOOR LOCK LIGHTS The "Oven" light STOP CLEAR PAD-- Used to clear
will glow each time the oven is turned on. The "Preheat" light any function previously entered
DELAY START PAD Used to set the
will glow when the oven is first set to operate, or if the desired except the time of day and minute
desired start time for baking. May be temperature is reset higher than the actual oven temperature, timer. Press STOP CLEAR to stop
used with COOK TiME to program a The "Door Locked" light will flash until the door locks when the cooking. Also the STOP CLEAR
delayed bake cycle or to program a self-clean cycle is in use. It glows constantly after the door locks pad is used to activate oven lockout
delayed clean cycle. (some models), setting. (some models).
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation.
1. To tell if your oven is set for normal or silent operation press and hold _s_l,_for 7 seconds. % = " or "SP" (speaker)
appears in the display.
2. Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode.
The display will show either % - " or "SP".
3. Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control will operate with normal sounds and beeps. If "- - " appears, the control is in the silent
operation mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold for 7 seconds until °F or °C appears in the display.
2. Press the A or v pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press (_t") to accept the changes.
18
Loading ...
Loading ...
Loading ...