Loading ...
Loading ...
Loading ...
12
OUTDOOR DUCTING MODE
This is the recommended extraction mode wherever possible for optimum
performance. If you are able to install an exhaust duct (not supplied) to vent the
air outside and operate your rangehood in outdoor ducting mode, proceed
as follows:
• Remove the charcoal filters by turning anticlockwise. The charcoal filters
are not required for outdoor ducting mode.
• Clip in the plastic front vent cover over the vent holes on the front of
the rangehood.
• Install the flue outlet adaptor to the top of the rangehood.
• Install the ducting pipe (not supplied) to the outlet on the top of the
rangehood and vent to the outside. We recommend using a ducting pipe with
a diameter of 120mm.
• When installing the rangehood in external ducting mode, you can cover
the front air outlet with the supplied front vent cover.
INSTALLATION (Cont.)
• Unscrew the 80mm fascia rail which is
already installed on the rangehood.
• Using the same screws, attach the 40mm
fascia rail supplied in the box.
• If you haven’t already done so, remove the
aluminium mesh filters from the underside
of the rangehood and set the two levers in
the centre of the motor housing to the
“Ducting” position.
Loading ...
Loading ...
Loading ...