Loading ...
Loading ...
Loading ...
electrical connection
17
1. Route the power cord to the junction box inside the hood.
2. Using listed conduit fittings and connectors, connect the power supply to the box and each line
to the appropriate wire following this color convention:
BLACK = HOT LEG
WHITE = NEUTRAL
GREEN/YELLOW = GROUND
Polarity must be observed.
Unit must be properly grounded.
Use a double throw disconnect switch.
3. Replace the box cover
4. Replace the Anti-grease Baffles.
All wiring must be in compliance with
nathional electrical code,
ANSI/NFPA 70-1999
and all local codes and
regulations.
Loading ...
Loading ...
Loading ...