Loading ...
Loading ...
Loading ...
3
1
2
Installation Instructions
The following things should be checked before starting the
dishwasher:
STARTING THE
DISHWASHER
1
The dishwasher is level and fixed properly
2
The water inlet valve is open
3
Is there a leakage at the connections of the conducts?
4
The wires are tightly connected
5
The power is switched on
6
Make sure the inlet and drain hoses are not twisted
7
All packing materials and removable printings should be taken out from
the dishwasher
Care and maintenance
The filter prevents larger remnants of food or other objects from
getting inside the pump.
The filter system consists of a coarse filter, a flat (Main filter) and a micro
filter (fine filter).
FILTERING
SYSTEM
Main filter
1
Food and soil particles trapped by this filter are pulverized by a special jet
on the spray arm and washed down to drain.
Fine filter
2
This filter holds soil and food residue in the sump area and
prevents it from being redeposited on the dishes during a wash cycle.
Course filter
3
Larger items, such as pieces of bone or glass, that could block the drain
are trapped in the coarse filter. To remove the items caught by the filter,
gently squeeze the tap on the top of this filter and lift it out.
FILTER ASSEMBLY
The filter efficiently removes food particles from the wash water, allowing it
to be re-cyclated during a cycle. For best performance and results, the fil-
ter assembly must be regularly cleaned. For this reason it is a good idea
to remove the larger food particles trapped in the filter after each wash
cycle by rinsing the filter and cup under running water. To remove the filter
assembly, pull on the cup handle in the upward direction.
17
Loading ...
Loading ...
Loading ...