Loading ...
Loading ...
Loading ...
7
Reversing the Door Swing
This unit can have its door open from the left or right. The default option is to open from the left, but if
you want to reverse the direction of the door, please follow the instructions below:
To make the reversal, look inside the appliance to find the top left hinge and bottom left hinge. The
bottom support bracket is used when the door opens from either side.
1. Carefully lay the appliance on its back. Use cushioning to protect the floor and the unit.
2. Using a Phillips screwdriver, remove the two screws on the bottom right hinge at the bottom of the
door. Keep the hinge in a safe place in case you need to reverse the door again in the future.
3. Carefully slide the door off and place it on a padded surface.
4. Interchange the plastic shaft sleeves at the top of the door.
5. Remove the bottom support bracket from the right side.
6. Remove the top right hinge
7. Remove the screws from the top left and transfer them to the right.
8. Install the top left hinge.
9. Install the bottom left hinge to the door. DO NOT OVERTIGHTEN THE SCREW.
10. Place the door back on the appliance, lining up the top hinge.
11. Install the bottom support bracket.
12. Adjust door alignment. When set, tighten the screws on the hinge.
13. Remove the handle. Transfer the screw hole covers to the left, then install the handle on the right.
NOTE: keep the other hinge in a safe place in case you want to reverse the door in the future.
Loading ...
Loading ...
Loading ...