Maytag MGR5775QDW 30" SELF-CLEANING FREESTANDING GAS RANGE

Use & Care Guide - Page 10

For MGR5775QDW.

PDF File Manual, 84 pages, Read Online | Download pdf file

MGR5775QDW photo
Loading ...
Loading ...
Loading ...
To cancel the CJock dispJay:
If you do not want the thlle of day to dispHay:
Press and hoHdthe CANCEL and CHock
pads for three seconds. The time of day
wiHHdisappear from the dispHay
When the chock dispHayis cancelled, press
the CHockpad to briefly dispHaythe time
of day.
To restore the CJoek display:
Press and hoHdthe CANCEL and CHockpads for three sec-
onds. The time of day wiHHreappear in the dispHay.
The timer can be set from one minute (0:01} up to 99 hours
and 59 minutes (99:59}.
The timer can be used independently of any other oven
activity. Jtcan also be set while another oven function is
operating.
The Timer does not control the oven. It only controls a
beeper.
To set the Timer:
1. Press the Timer pad.
° 0:00 lights in the display.
° The colon wiil flash.
2.
_mer
Press the More+ or Less- pad unti[ the
correct time appears in the dispHay.
° The coHonwiHHcontinue to flash. Less-
3. Press Timer pad again or wait four seconds. '..................
° The coHoncontinues flashing and the time begins
counting down.
° The Hastminute of the timer countdown wiHHbe dispHayed
as seconds,
4. At the end of the set time, one Hongbeep wiHHsound.
To eanceJ the Timer:
1. Press and hoHdthe Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
Locking the Contro
and Oven Dooc
The touehpad eontroHsand oven door earl be Hockedfor
safety, eHeaning,or to prevent unwanted use, They wiHHnot
function when Hocked,
If the oven is currentHyin use, the controHsand door cannot be
Hocked.
The current time of day wiHHremain in the dispHaywhen the
controHsare Hocked.
To tock:
Press and hold the CANCEL and Cook &
Hold pads for three seconds. (Press the
CANCEL pad first.}
LOCK flashes in the display.
To unlock:
Press and hoHdthe CANCEL and Cook & HoHdpads for three
seconds. (Press the CANCEL pad first.}
LOCK disappears from the dispHay.
Fault Codes
BAKE or LOCK may flash rapidHyin the dispHayto aHertyou if
there is an error or a probHem. Jf BAKE or LOCK flash in the
dispHay,press CanceHpad. If BAKEor LOCK continue to flash,
disconnect power to the appHiance. Wait a few minutes, and
then reconnect power. If the flashing stiHHcontinues, discon-
nect power to the appHiance and caHHan authorized servicer.
9
Loading ...
Loading ...
Loading ...