Loading ...
Loading ...
Loading ...
BLY
i i
CHECK TIRE PRESSURE /CHECKLIST
The tires on your tractor were ovednflated at the factory for
shipping purposes_ Correct tire pressure is important for
best cutting performance.
• Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS" on page 3 of this manual
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SA TISFA CTION FROM
THIS QUALITY PRODUCT
PLEASE REVIEW THE FOLLOWING CHECKLIST:
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments section of this
manual°
_" All assembly instructions have been completed..
v" No remaining loose parts in carton.
,/ Battery is properly prepared and charged. (Minimum
1 hour at 6 amps)..
,/ Seat is adjusted comfortably and tightened securely.
,/ NI tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
#' Be sure mower deck is propedy leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling)..
,/ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
,/ Check wiring. See that all connections are still secure
and wires are properly clamped°
,/ Before driving tractor, be sure freewheel control is in
drive position°
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
•/ Engine oil is at proper level
,/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,/ Become familiar with all controls - their location and
function. Operate them before you start the engine..
J Be sure brake system is in safe operating condition.
,/ tt isimportant to purge the transmission before operat..
ing your tractor for the first time. Follow proper starting
and transmission purging instructions (See"TO START
ENGINE" and 'PURGE TRANSMISSION in the Op-
eration section of this manual).
10
Loading ...
Loading ...
Loading ...