Loading ...
Loading ...
Loading ...
Note:Thetimeofdaymustfirstbesetinordertooperatetheoven.
READTHEINSTRUCTIONSCAREFULLYBEFOREUSINGTHEOVEN.Forsatisfactoryuseofyouroven,becomefamiliarwith
thevariouspadfunctionsoftheovenasdescribedbelow.
BAKETIME
PAD-- Used to
enter the length of
the baking time.
CLOCK PAD-- Used _
to set the time of day.
Q
TIMER ON/OFF
PAD-- Used to set or
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous Bake
feature.
START TIME PAD-- Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TIME to program a delayed
bake cycle.
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time
of day, clean time and minute timer.
® Oven
OVEN, PREHEAT 8, DOOR LOCKED LIGHTS*--The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
FEATURE INDICATOR LIGHTS--
These light to show which feature
is in use.
BAKE PAD--Used
to select the bake
function.
BROIL PAD-- Used to
/ select the variable broil
i _function.
SELF-CLEAN PAD--
Used to select the Self-
Cleaning cycle. A 2 or 3
hour Self-Clean time may
be selected.
CLEAR/OFF PAD-- Used to clear
any function previously entered
except the time of day and minute
timer. Press CLEAR/OFF to stop
cooking. Also the CLEAR/OFF pad
is used to activate oven door lockout
setting.
*Note: The OVEN indicator light on the electronic display Temperature conversion
will turn ON & OFF when using the Bake feature & during The electronic oven control is set to oPeratein °F
preheat.This is normal & indicates that the 0yen is cycling (Fahrenheit) when shipped from the factory. The oven can be
tomaintain the selected baking temperature, When the programmed for anytemperature from 170°F to 550°F (77°C
preheat indicator !ight turns OFF, your oven is ready, t°287°C)
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold _'_. After
7
seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold @ again for 7 seconds until the control
beeps
once.
To change the temperature to °C (Celsius) or from °C to
°F (control should not be in a Bake or Clean mode):
1. Press _. "----" appears in the
display.
2. Press and hold the /_ until "Hr' appears in the
display.
3. Press and hold _ until °F or °C appears in the
display.
4. Press the ,_ or V to change °F to °C or °Cto °F.
5. Press any control pad to return to normal operating
mode.
SettJ.g Co.t o! lm
Note" The time of day must first be set in order to operate theoven, . _
NOTE: To turn the time of day display OFFor ON in the display piess _ and h0!d {or 15 second s (the control will beep
once) and then release. This feature does not remove the set time Ofday from the memory ofthe control. When the display
is tuined 0FE the time 0f day Wi!!ieiappeai f0i a few sec0_ds any time the @ pad is touched:
Loading ...
Loading ...
Loading ...