Loading ...
Loading ...
Loading ...
8
bromic.com/heating
HEATING INSTALLATION INSTRUCTIONS CONTINUED...
8. To fix heater at desired angle, fully insert M3x0.4” positioning screws (included with wall bracket) on
both sides of mounting bracket whilst holding heater in the desired position (h). The heater can positioned
straight, or be angled 30deg either way.
9. Fit the smaller cover over the heater bracket so that the slots pass over the shafts of the M6x0.6”
mounting screws (i). Fit the larger cover over the smaller cover in the same way from the opposite side of
the bracket (j). Use angled covers if heater is angled. Use straight covers if heater is not angled.
10. Tighten mounting M6 screws firmly, ensuring covers fit snugly against the bracket on all sides (k).
k
Straight bracket option
j
i
h
j
h
i
k
Angle bracket option
8. To fix heater at desired angle, fully insert M4x10mm positioning screws on
both sides of mounting bracket whilst holding heater in the desired position
(h). The heater can positioned straight, or be angled 30deg either way.
9. Fit the smaller cover over the heater bracket so that the slots pass over the
shafts of the M6x14mm mounting screws (i). Fit the larger cover over the
smaller cover in the same way from the opposite side of the bracket (j).
Use angled covers if heater is angled. Use straight covers if heater is not
angled.
10. Tighten mounting screws firmly, ensuring covers fit snugly against the
bracket on all sides (k).
Loading ...
Loading ...
Loading ...