Loading ...
Loading ...
Loading ...
Operating Your Heater
HEATER CONTROL
Ensure heater is on a flat, stable, heat-resistant surface. Once the heater is in a safe
operating position and all switches are in the off position, insert the power plug into
the mains outlet. Turn the Power Switch at the back of the heater to the 'I' position.
The heater is now in STANDBY mode.
POWER: Press the power button to turn the heater ON. The ambient temperature
will appear on the display and the heater will be in ‘Fan Only’ mode.
Press the power button again to turn the heater OFF. Note- the fan will run for 30
seconds before the appliance shuts down.
HEAT SETTINGS: Press the heat setting button to change between ‘Fan Only’
‘Low Heat’ and ‘High Heat’
OSCILLATION: Press the oscillation button to turn swing ON/OFF.
FLAME EFFECT: Press the flame effect button to turn the flame effect ON/OFF.
TEMPERATURE SETTING: Press the temperature setting button to increase the
desired temperature 1℃. Choose between the range 18-45℃.
To set the temperature on your remote control, press the temperature setting
button and increase/ decrease by pressing “+” and “-”.
TIMER: Press the timer button to turn on the countdown timer. Each press will
increase the timer amount by 1 hour, between 1-8 hours. The LED display will flash
up with the relevant timer duration.
Control Panel
LED Display
Remote Control
Loading ...
Loading ...
Loading ...