Loading ...
Loading ...
Loading ...
The operation of any tractor can result in foreign objects thrown into
the eyes, which can result in severe eye damage. Always wear safety
glasses or eye shields while operating your tractor or performing any
adjustments or repairs. We recommend standard safety glasses or a
wide vision safety mask worn over spectacles.
HOW TO USE YOUR TRACTOR
TO SET PARKING BRAKE
Your tractor is equipped with an operator
presence sensing switch. When engine is
running, any attempt by the operator to leave
the seatwithoutfirst setting the parking brake
will shut off the engine.
1. Depress clutch/brake pedal (B) all the
way down and hold.
2. Pull parking brake lever (C) up and hold,
release pressure from clutch/brake pedal
(B), then release parking brake lever.Ped-
alshould remain in brake position, Ensure
parking brake will hold tractor secure,
STOPPING
MOWER BLADES -
• To stop mower blades, move attachment
clutch control to disengaged position (t_).
ENGINE -
• Move throttle control (D) to fast position.
NOTE: Failure to move throttle control to fast
position before stopping may cause engine
to "backfire".
• Turn ignition key (F) to "STOP" position
and remove key. Always remove keywhen
leavingtractor to prevent unauthorized use.
• Never use choke to stop engine.
IMPORTANT: Leaving the ignition switch in
any position otherthan "STOP" will cause the
battery to discharge and go dead,
NOTE: Under certain conditions when tractor
is standing idle with the engine running, hot
engine exhaust gases may cause "brown-
ing" of grass. To eliminate this possibility,
always stop engine when stopping tractor
on grass areas.
_, CAUTION: Always stop tractor com-
pletely, as described above, before leaving
the operator's position.
TO USE THROTTLE CONTROL (D)
Always operate engine at full speed (fast).
• Operating engine at less than full speed
(fast)reduces engine's operating efficiency,
• Full speed (fast) offers the best mower
performance.
"_ Clutch Control -' Clutch Control
"Engaged.... Disengaged"
GROUND DRIVE -
• Tostop ground drive, depress brake pedal
all the way down.
• Move motion control lever to neutral
position.
11
Loading ...
Loading ...
Loading ...