Loading ...
Loading ...
Loading ...
6
• To disconnect the heater, first turn controls to the OFF position, then remove
the plug from the outlet. Never pull by the cord.
• No object should be inserted into any part of the heater at any time.
• To prevent a possible fire, do not block air intakes or exhaust in any manner.
• Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing parts inside. Do not use it in the areas where
gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or injury to
persons.
CAUTION: Always plug heaters directly into a wall outlet/ receptacle.
Never use with an extension cord or relocatable power tap (outlet/power
strip).
• The output of this heater may vary and its temperature may become intense
enough to burn exposed skin. Use of this heater is not recommended for persons
with reduced sensitivity to heat or an inability to react to avoid burns.
• Before using the unit, check if the voltage indicated corresponds with the
intended outlet (120V).
• This heater may include a visual alarm to warn that parts of the heater are
getting excessively hot. If the alarm flashes, immediately turn the heater off and
inspect for any objects on or adjacent to the heater that may cause high
temperatures. DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...