Loading ...
Loading ...
Loading ...
Toavoidelectricshock,whichcancause
deathorseverepersonalinjury,disconnect
therefrigeratorfromelectricalpowerbefore
connectingawatersupplylinetothe
refr!gerpr..................................................................................................................................................................................................
To Avoid Property Damage:
* Copper or Stainless Steel braided tubing
is recommended for the water supply
line. Water supply tubing made of 1/4
inch plastic is not recommended to be
used. Plastic tubing greatly increases
the potential for water leaks, and the
manufacturer will not be responsible for
any damage if plastic tubing is used for
the supply line.
* DO NOT install water supply tubing in
areas where temperatures fall below
freezing.
* Chemicals from a malfunctioning softener
can damage the ice maker. If the ice
Before Installing The Water Supply Line,
You Will Need:
* Basic Tools: adjustable wrench, fiat-blade
screwdriver, and Phillips TM screwdriver
* Access to a household cold water line with
water pressure between 30 and 100 psi.
A water supply line made of 1/4inch (6.4
mm) OD, copper or stainless steel tubing.
To determine the length of tubing needed,
measure the distance from the ice maker
inlet valve at the back of the refrigerator
to your cold water pipe. Then add
approximately 7 feet (2.1 meters), so the
refrigerator can be moved out for cleaning
(as shown).
* A shutoff valve to connect the water supply
line to your household water system. DO
NOT use a self-piercing type shutoff valve.
* Do not re-use compression fitting or use
thread seal tape.
* A compression nut and ferrule (sleeve) for
connecting a copper water supply line to
the ice maker inlet valve.
iiii i!i!i!i! i!!i!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii i ii:i! i!:i i!i
Ensure that your water supply line
connections comply with all local plumbing
codes.
for recommendations on water lines and
associated materials prior to installing your
new refrigerator. Depending on your local/
state building codes, Frigidaire recommends
for homes with existing valves its Smart
Choice ® water line kit 5305513409 (with
a 6 ft. Stainless Steel Water Line) and for
homes without an existing valve, Frigidaire
recommends its Smart Choice ® water line
kit 5305510264 (with a 20 ft. Copper Water
Line with self-tapping saddle valve). Please
refer to www.frigidaire.com/store for more
information.
Loading ...
Loading ...
Loading ...