Loading ...
Loading ...
Loading ...
9
HANDLE INSTALLATION
1. Remove handles from protective packaging.
2. Position freezer handle end caps over up-
per and lower pre-installed shoulder bolts
(A) that are fastened into door, ensuring
the holes for the set screws are facing
towards the refrigerator door.
3. While holding handle rmly against door,
fasten furthermost upper and furthermost
lower Allen set screws (B) with supplied
Allen wrench.
NOTE
All set screws should be tightened and sub-
ush (Allen set screw should be seated just
below the surface of the end cap) of handle
end cap. The end caps should be drawn
tight to freezer and refrigerator doors with
no gaps.
Freezer Upper
End Cap
Refrigerator Upper End
Cap
Refrigerator Lower End
Cap
Freezer Lower
End Cap
4. Firmly tighten the inside Allen set screws.
5. Repeat steps 2 through 4 to install
refrigerator handle. Ensure the holes for
the set screws are facing towards the
freezer door.
CAUTION
Wear gloves and safety goggles and use
extreme CAUTION when installing these
handles. The rounded end of the handles
may be sharp (some models).
IMPORTANT
To ensure proper installation of handles,
please review these instructions and illustra-
tions thoroughly prior to installing the handles.
Ensure Handle Set Screws
are Facing Each Other
with Doors Closed
Loading ...
Loading ...
Loading ...