Loading ...
Loading ...
Loading ...
Getting started
EN English
Troubleshooting
Problem pairing and connecting
•
Make sure the earphones are not connected to another device.
•
Disable and enable Bluetooth
®
on your device.
•
Move the earphones closer to the device or alter their positions
to avoid Bluetooth
®
interference.
•
Verify no other wireless equipment interfere with your earphones
Bluetooth
®
signal.
Problem with sound transmission
Move the streaming device to another position. Your body, distance,
differen materials and other wireless equipment can interfere with the
wireless signal between your device and earphone.
• If the earpieces does not pair with eachother, place the earpieces
in the charging case, then take them out both at the same time.
FAQ and quickstart guide
Visit jaysheadphones.com for more instructions and help on this
product.
Power on/off and pairing
To power on, place the earpieces in the charging case.
The left and right earbud will pair and turn on automatically.
To pair, open the lid of the charging case and go to Bluetooth
®
settings on your device and select “JAYS t-Seven” to pair with the
earphones. If the pairing fails, the earpieces will stay in pairing mode
for a few minutes until they finally power off.
To power off, place the earpieces in the charging case and they will
turn off automatically. If the Bluetooth
®
on the paired device turns
off, the earphones will turn off automatically.
Reconnecting and additional pairing
If the earpieces recognize a nearby previously paired Bluetooth
®
device when taken out of the charging case, they will pair
automatically to that certain device.
Charging the earpieces
Place the earpieces in the charging case, the charging will begin
automatically. The charging is indicated by the white LEDs on the
charging case . Left and right LED on the charging case will also be
lit when charging corresponding earpiece. When white LEDs turn off,
the earphones are fully charged.
Charging the case
Charge the case by connecting the included cable to the bottom of
the case and any certified USB power output. A full 100% charge will
take around 2.5 hours (depending on temperature and charger).
Battery status of the earpieces
When the battery level is running low, the promt voice will
automatically announce the current battery level in the earphones.
Battery status of the case
When the earpieces are placed in the case, the LEDs on the case will
display the battery level of the case. One light, 25% battery. Two
lights, 50% battery. Three lights, 75% battery. Four lights 100%
battery.
Resetting
To reset, place the earpieces in the charging case.
Press and hold the button on the back of the charging case for 10
seconds. The LED’s will flash, once the LED’s are turned of, the reset
is done.
Loading ...
Loading ...
Loading ...