Loading ...
Loading ...
Loading ...
Operating Instructions
Put a drip tray (not supplied) under the continuous drain outlet, then
unscrew the drain cap to allow the condensate to flow into the drip
tray. Replace the drain cap to the continuous drain outlet when no
condensate flows out.
Put the drip tray under the bottom drain outlet, then remove the
rubber stopper from the drain outlet, to allow the condensate to flow
into the drip tray. If your drip tray can’t hold all the condensate, a
number of fills will be needed.
Replace the drain cap to the bottom drain outlet when no
condensate flows out.
Note: To ensure all condensate residue has been removed, tilt the
unit by lifting it slightly upwards from the front until no more
condensate comes out from the drain outlet.
Figure 25
Figure 24
Emptying the condensate residue inside the unit during winter storage.
Bottom
Drain Outlet
Drip tray
Drainage Instructions
NOTE:
There is a 1/4” hole on the window kit for leading the drainage hose
outside during the heating mode.
Do not drain condensate outside when outside temperature is
below 32°F (0°C).
Window slider kit
1/4" hole
Loading ...
Loading ...
Loading ...