Loading ...
Loading ...
Loading ...
6
1886
Ceiling Bracket Top housing Hanging Fan Wiring Canopy Blades Light Glass/Bulbs
Installing the Canopy
Installing the Blades
Repeat x5
x15
BAG
Blade Screw
x15
BAG
Blade Washer
Put the blade washers found in the hardware
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
2 of 3
Canopy
Screws
BAG
1 of 3
Canopy
Screws
BAG
Swing the fan up to align the
canopy screw holes with the
mounting holes on the ceiling plate.
Hold the canopy up with the screw holes
aligned. Partially install two canopy screws,
found in the
hardware bag, into the
holes opposite the ceiling plate hooks.
Partially install a canopy screw, found in the hardware bag, between the
ceiling plate hooks. When all the holes are properly aligned, securely tighten all
three canopy screws.
Note: The slots in the canopy must
remain engaged while swinging the
canopy for alignment.
Fan style may vary.
Note:
Fan style may vary.
Note:
Loading ...
Loading ...
Loading ...