Loading ...
Loading ...
Loading ...
Instruments & Controls
27
Indicators & Displays
The digital clock (1) shows time with the clock mark (2) when the
ignition switch is ON (q).
To adjust the time, proceed as follows:
1.
Turn the ignition switch ON (q) and select the digital clock mode.
2.
Press and hold the mode select button (3) until the display starts
blinking.
3.
To advance the display 1 minute at a time, press and release the
mode select button for 0.5 seconds.
To advance the display more quickly, press and hold the mode
select button.
4.
Release the mode select button when the display reaches the
desired time.
5.
To end the adjustment, press and release the mode select button
for less than 0.5 seconds or turn the ignition switch to OFF (w).
After the battery is reconnected (page 197), check the clock.
Readjust the clock if necessary.
Digital Clock
(3) mode select button
(1) (2)(3)
(1) digital clock
(2) clock mark
Loading ...
Loading ...
Loading ...