Loading ...
Loading ...
Loading ...
28
GB
System reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete
carry out the following procedure.
1. Switch on your radio.
2. Press and hold in the Info button to enter the setting menu. Press the Tuning up or down until
‘System Setting’ shown on the display. Press the Select button to enter the menu.
3. Press the Tuning Up or Down button until “Factory Reset” appears on the display, press the
Select button the display shows “Factory Reset’. Press the Tuning up or down button to
highlight ‘Yes’ and press the Select button to perform factory reset. If you do not wish to carry
out a system reset, highlight 'NO' and then press the Select button. The display will revert to
the previous menu.
4. If a factory reset is performed, the station list and presets will be erased. Display will show
“Restaring“ and “0:00“, also back to standby mode. You need to start over the settings again
as the time you used the clock radio for the rst time. In case of malfunction due to electrostatic
discharge, reset the product (reconnection of power source may be required) to resume normal
operation.
Loading ...
Loading ...
Loading ...