Loading ...
Loading ...
3 - ENG
INSTRUCTION MANUAL High Pressure Hose Reel
INSTALLATION
INSTALLATION AND SETUP
1. Attach the handle (A) to
flange assembly using the
nuts/bolts provided.
2. Mount base (B) on a proper surface
using appropriate fasteners.
Make sure mounting is secure.
3. Apply sealant tape to water
supply hose fitting and connect to
hose reel inlet fitting (C). Always
ensure connections are secure.
4. Route output hose (D) through
hose guide, flange assembly
slot and clamp (F).
5. Apply sealant tape to output
hose and connect to hose
reel swivel (E). Always ensure
connections are secure.
6. Tighten clamp (F).
7. Extend hose and wind onto the
reel drum by turning the handle
with the lock pin (H) unlocked.
Lock reel when not used.
8. To adjust reel tension, turn the
tensioning nut (G) on the side of
the reel. Clockwise to tighten.
Counterclockwise to loosen.
A
H
C
B
E
F
G
D
Loading ...