Loading ...
Loading ...
Loading ...
Changing Oven Light
Use the rocker switch Uocatedon the controUpaneUto turn the oven Hght ON or OFF, On
some modeUs,the oven Hghtautomatically wHUturn automatically ON when the oven door
is opened,
Be sure the oven is unpUuggedand aHparts are COOL before repUacing
the oven Hght,Wear a Ueather-faced gUovefor protection against possiMe broken gUass,
To Change the Oven Light
1, Turn eUectricaUpower off at the main source or unpUugthe oven,
2, Press wire hoUderto one side to reUeasethe gUassshield (some models, Figure 1),
3, Replace bulb with a new 40 watt appliance bulb,
4, Replace glass shield in socket and snap wire holder into place (some models, Figure
1),
5, Turn power back on again at the main source (or plug the oven back in),
6, The clock (if equipped) will then need to be reset,
Figure 1 - Single Oven Modete
I
Figure 2 - Double Oven Modete
Upper Oven Onty
Adjusting Your Oven Temperature
For instructions on how to adjust the oven temperature refer to the electronic oven control guide.
Solutions to Common Problems
OCCURRENCE POSSIBLE CAUSE/SOLUTmON
Oven ContromBeeps and Displays any F Electroniccontrol hasdetectedafault condition=PushCANCEL toclearthe displayand stop
code (for exampmeF11)o thedisplay from beeping. Reprogram the oven. If a fault reoccurs, record thefault number,
push the CANCEL pad and contact an authorized servicer.
_nstallationo Poor installation. Placea level on an oven rack in center of oven. Contact installing agent
if rack is not level.
Entire appliance does not operate.
Kitchen cabinet misalignment may make oven appear to be unlevel= Be sure cabinets are
square and level, Contact cabinet maker to correct problem,
Make sure cord/plug is securely plugged into electrical outlet,
Cord/plug is not installed or connected, Contact your dealer, installing agent or authorized
servicer,
Service wiring not complete, Contact your deaIer, installing agent or authorized servicer,
Power outage, Check house lights to be sure, Contact your local electric company,
Short in cord/plug= Replace cord/plug,
14
Loading ...
Loading ...