Loading ...
Loading ...
Loading ...
b) Light Blue: The dry cycle runs at high heat and the default
time is 200 minutes. This program works with a sensor and will
adjust the time automatically and will stop when the clothes
are dry. The time cannot be changed in this program.
c) Dark Blue: This program is the “ECO” cycle which runs
intermittently with no heat and then high heat. This program
works with a humidity sensor and will adjust the time
automatically. The time cannot be changed in this program.
d) Green: The dry cycle runs at half heat and the default time is
90 minutes. The time can be changed by pressing the Time
button. This program is best for drying a light to normal load and
if you want clothes to be damp dry for ironing or for hanging up
to dry.
Note: This button is inactive during the operation of the dryer.
To change the program, touch the “Start/Pause” button to pause
the dryer before touching this button to change the drying
program.
Step 3 - Time Button
This button is used to set the drying time. With each press of
the button, the time increases in 20-minute increments, up to
200 minutes. To change the time once the drying program is
running, press the Start/Pause button, make the time change,
and then press Start/Pause again to restart.
Step 4 - Start/Pause
Press this button to start or pause the dryer operation.
When the program and time are set, touch the button to start
the dryer. To change the time or program while the dryer is
running, touch this button to pause. Select the desired program
and then press this button again to restart.
10
Loading ...
Loading ...
Loading ...