Loading ...
Loading ...
Loading ...
Door Removal instructions
E_p
H_nge
£r,ew
Tools Necessor
Phi io_ ec_,_
3/8"
Fixc_d
vv/er_c_
Hinge
TO DISCONNECT
• Pressouter ringagainstface
remove tube
EJSh until mark touches face of hthng
DOOR REMOVAL INSTRUCTIONS:
/f it is necessary to move the refrigerator through narrow doorways,
foflow these steps to remove the doors.
iMPORTANT: Before you begin, turn Freezerand Fresh Foodcontrols
to "'0" and remove electrical power cord from wall outlet. Remove any
food from door shelves.
1. Disconnect electrical supply,
2, Open both doors, then remove toe grille,
3, Close doors,
To Remove Refrigerator Door:
1 Remove top hinge cover screw on refrigerator door and remove cover,
2 Trace around hinge with soft lead pencil, This will make it easier to realign
doors when they are replaced,
3. Remove top hinge and lift refrigerator door off bottom hinge pin, Set door
aside
4, Remove bottom hinge, f necessary,
5, Reverse this procedure to reinstall refrigerator door
To Remove Freezer Door:
1. Disconnect water line coming Promlower hinge of freezer door at connection
located under front of freezer: Press outer ring against face of fitting, then pull
to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on
flat sides of each connector and bend both parts back and forth then with
firm grasp, pull both pieces apart.
4. Trace around hinge with soft lead pencil. This will make it easier to realigH
doors when they are replaced.
5. Remove top hinge, allowing wuringharness to pull through hinge and lift freezer
door off of bottom hinge pin.Lay door down flat to avoidkinking water line.
6. Remove bottom hinge, f necessary.
7. Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled, connect water line by inserting [ube and
push until mark touches face of fitting, replace toe grille and plug in electrical power
cord. Turn both temperature controls to center position. Adjust settings as necessary.
J J
"ubi_#
_" Hinge
Assealbly
Screws
Loading ...
Loading ...
Loading ...