Loading ...
Loading ...
Loading ...
Yournewovenhasbeenfactorycalibratedandtestedtoensureanaccuratebakingtemperature.Forthefirstfewuses,follow
yourrecipetimesandtemperaturerecommendationscarefully.Ifyoufeelyourovenistoohotortoocoolfromyourbaking
experience,theoventemperaturemaybeadjustedtoyourliking.
Note:DONOTadjustyouroventemperaturebasedonoventhermometers,suchasthosefoundingrocerystores,theymay
notbeaccurate.
ToAdjusttheOvenTemperature(donotuseBakeorBroilwhileadjustingtheoventemperature):
1. Press&holdtheQ keypadandreleaseafterthedisplaybeginsflashingthefactorytemperaturesettingof00.
Note:Iftheoventemperaturehasbeenpreviouslyadjustedfromthefactorysetting,thecurrenttemperatureadjustedvalue
willflashinthedisplayinstead.
2. Youmayincreasetheoventemperaturein5°Fincrementswitheachpressofthe _ keypadtoa maximumoven
adjustmentof+35°F.Youmayalsoadjusttheoventemperaturedownwardin5°Fincrementswitheachpressofthe
keypad(totaladjustmentrangeof-35to ÷95F). Note: Your oven control was factory set in the (Fahrenheit) °F Temperature
Display Mode. To change for (Celsius) °C, see Changing the Temperature Display Mode in the Oven Control Functions
section of this Use & Care Manual.
3. If no other key pad is pressed after 5 seconds the display will begin to flash.
4. Ifyou do not want to keep the display adjustment, press the _ key pad before the oven control beeps. This will cancel
the temperature adjustment procedure. To start this procedure over again begin with step 1 above OR;
5. If you want to keep the adjustment, wait until the display quits flashing and the oven control beeps once.
6. The oven temperature adjustment has be accepted by the oven control and the display will return to the time of day.
Notes: The oven temperature adjustment may be made if your oven control has been set to operate in the (Celsius) °C
Temperature Display Mode. In this case each press of the ,-_ or _ key will adjust in 1°C increments upward
(maximum +18°C) or downward (maximum -18°C), depending on which arrow key pad is pressed.
Loading ...
Loading ...
Loading ...