Loading ...
Loading ...
Loading ...
953.408UK User Manual
Bluetooth
The Bluetooth function allows connection of a smart phone or tablet to the media player section for playback
of stored files or streamed digital audio. To enable this function, it will be necessary to pair the sending device
to the receiver as follows.
1. Press the media player MODE button until the display flashes “”
2. Open the Bluetooth settings menu on the smart phone or tablet (or other sending device)
3. Scan for Bluetooth devices and look for “A series” in the list of available devices
(ensure that the A8 is powered on, Bluetooth mode is selected and within reception range)
4. Select “A series” and the sending device should confirm that it is connected as an audio device.
5. Play audio from the sending device, ensuring that volume controls are not turned down/muted
6. Select MEDIA PLAYER on the input selector and turn up the MEDIA control (6) to the required level.
The , and buttons will operate in Bluetooth as remote playback controls.
Holding the or buttons will adjust the output volume of the player.
If the sending device goes out of range, connection should automatically resume when back in range.
Likewise, if a different mode is selected, connection should resume when Bluetooth mode is re-selected.
If Bluetooth is disabled on the sending device or paired to a different receiver, it will be necessary to re-
connect the sending device to the A8 from step 2 above to re-establish a Bluetooth link.
Media player remote control
In addition to front panel controls, the media player can be operated via the supplied I.R. remote handset.
As supplied, the handset will have a plastic tab at the bottom to preserve battery charge before first usage.
Remove this tab by pulling away from the handset to engage the battery and activate the remote control.
If this needs to be replaced, the battery compartment can be slid out from the bottom to reveal the cell.
Replace the battery with a CR2025 button cell.
Point the top of the remote control towards the media player display and operate in line of sight.
Some of the controls on the remote handset mirror those on the front panel and are described below.
Media player power on/standby button
Repeat mode – select Random, One, Folder or All tracks
MODE
Select USB, SD, FM tuner or Bluetooth mode
CH- / CH+
Select FM radio station
EQ
Select preset EQ – Bass, Pop, Rock, Jazz, Classical or Normal
/
Previous or Next track select
Play / Pause track (auto-tune in FM tuner mode)
/
Adjust media player volume down or up
0 - 9
Direct track or channel access – key in number
Loading ...