Loading ...
Loading ...
Loading ...
General Care & Cleaning
To Remove the "Hidden Bake" Cover (some models)
1. In order to remove the "hidden bake" cover, pull the back edge with one
hand about 1/2 inch and lift up the "hidden bake" cover with both hands•
(See picture)
2. When reinstalling the "hidden bake" cover, be sure to put it all the way to the
back of the oven and lay it down on the 2 shoulder screws. Then push the
front edge of the cover in its place below the front bracket.
To have easier access to the "hidden bake" cover, you can remove the oven
door by following the instructions on previous page.
IMPORTANT: Always replace the "hidden bake" cover before the next use.
Adjusting the Oven Temperature
Your oven thermostat has been precisely set at the factory. This setting may differ from your previous oven, however, so
your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or cool for your
recipe times, you can adjust the thermostat so that the oven cooks hotter or cooler than the temperature displayed.
To Adjust Oven Temperature:
• Press and hold pad for 8 seconds. The display now indicates the amount of degrees offset between the original
factory temperature setting and the current temperature setting• If the oven control has the original factory calibration,
the display will read "0".
2. The temperature can now be adjusted up or down 35°F or 19°C, in I°F or 1°C steps by pushing and holding the A or
v. Adjust until the desired amount of degrees offset appears in the display• When lowering the oven temperature, a
minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of de-
grees.
3. When you have made the desired adjustment, wait 5 seconds and the timer will go back to the time of day display•
Note: Oven temperature adjustment made will not change the Self-Cleaning feature temperature.
Before You Call
Solutions to Common Problems
Before you call for service, review this list. it may save you time and expense. The list includes common occurrences that
are not the result of defective workmanship or materials in this appliance.
Oven Control Beeps and Displays
any F code error (example F11).
the fault number. Press STOP and call Sears or another qualified servicer.
Faulty Installation. Place oven rack in center of oven. Place a level on the oven rack. Contact
installing agent if rack and cabinet cutout flooring are not level.
Kitchen cabinet misalignment may make oven appear to be not level. Be sure
cabinets are square and level. Contact cabinet maker to correct problem.
Oven light does not work. Burned-out or loose bulb• Follow the instructions under Changing Oven
Light to replace or tighten the bulb.
Fan noise during cooking A cooling fan may automatically turn on and off to cool internal parts. This is
.......................................................................................................................................................................................n°r the !an may €on!!nue t afte ov rned off:..............................................................
Electronic control has detected a fault condition. Press STOP to clear the
display and stop the beeping. Reprogram the oven. If a fault reoccurs, record
2O
Loading ...
Loading ...
Loading ...