Loading ...
Loading ...
Loading ...
4. Selecting programme settings
37
SmartStart
The SmartStart function lets you
define a time period during which your
tumble dryer will start automatically.
The appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity tariff
is particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
15minutes and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying pro-
gramme.
Setting the time period
If you have activated the
SmartGridfunction in Settings, touch
the sensor control to set the time
period when your tumble dryer should
be started automatically (see “Settings
– SmartGrid”).
The procedure for setting this is the
same as for setting the delay start time.
Use the sensor controls to enter
the hour and confirm your entry with
the OK sensor control.
The hour will be saved and the minute
number block will be highlighted.
Use the sensor controls to enter
the minutes and confirm your entry
with the OK sensor control.
Press the Start/Add laundrysensor
control to start the drying programme
with SmartStart.
The following will appear in the display:
SmartStart
Loading ...
Loading ...
Loading ...