Loading ...
Loading ...
Loading ...
Installation Manual 11
ENGLISH
Indoor unit
The wall you select should be strong and solid
enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a
concrete wall, use anchor bolts.
• Mount the installation plate horizontally by
aligning the centerline using Horizontal meter
.
2. Measure the wall and mark the centerline. It is also important to use caution concerning the
location of the installation plate. Routing of the wiring to power outlets is through the walls
typically. Drilling the hole through the wall for piping connections must be done safely.
Fixing Installation Plate
Installation Plate
Chassis
Hook
Type "A" Screws
Ø70(2.76)
133(5.2)
95(3.7)
Right rear piping
Left rear piping
Installation Plate
Place a level on raised tab
Unit Outline
217(8.5)
175(6.9)
[Unit : mm(inch)]
442(17.4) 442(17.4)
Ø70(2.76)Ø70(2.76)
• Drill the piping hole with a ø70mm(2.76in)
hole core drill. Drill the piping hole at either
the right or the left with the hole slightly
slanted to the outdoor side.
Drill a Hole in the Wall
5-7mm
(3/16in~5/16in)
Indoor
WALL
Outdoor
Loading ...
Loading ...
Loading ...