Loading ...
Loading ...
Loading ...
Fig. 2
Oven
Door-
Roller
Pin
H_nge
A_m
Door Hinge
locations
with oven door
fully open
Fig. 1
Fig.3
Fig. 4
Removing and Replacing the Lift-Off Oven Door
The door isheavy. For safe, temporary storage, lay the door fiat with the
inside of the door facing down.
To Remove Oven Door:
1. Open oven door completely (horizontal with floor- See Fig. 1).
2. Pull the door hinge locks on both left and right door hinges down from the oven frame
completely towards the oven door (See Fig. 2). A tool such as a small fiat-blade
screwdriver may be required.
3. Firmiygrasp both sides ofoven door along the door sides (Do not use the oven door
handle- See Fig. 3).
4. Close the door to the broil stop position (the oven door will stop into this position
just before fully closing).
5. With the oven door in the broil stop position, iifttheovendoorhingearmsoverthe
roller pins located on each side of the oven frame (See Fig. 4).
To Replace Oven Door:
1. Firmlygrasp both sides cloven door along the door sides (Do not use the oven door
handle- See Fig. 3).
2. Holding the oven door at the same angle as the removal position, seat the hook of
the hinge arm over the roller pins located on each side of the oven door frame (See
Fig. 4). The hook of the hinge arms must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor- See Fig. 1).
4. Push the door hinge locks up towards and into the oven frame on both left and right
oven door hinges (See Fig. 2) to the locked position.
5. CIosetheovendoor.
Special Door Care Instructions - Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass mayweaken its structure causing
an increased risk of breakage at a later time.
17
Loading ...
Loading ...
Loading ...