Loading ...
Loading ...
Loading ...
12
Installation, Operation & Maintenance Manual
REACH-IN REFRIGERATORS AND FREEZERS
5. Maintain the door/hinge assembly at about 100°,
and slide it up to the top hinge pin. Conrm proper
alignment, and then fasten the bottom hinge.
6. The door must swing closed by itself with no restric-
tion, conrm that the door swings freely.
7. Restore power to the unit and conrm that the in-
terior light turns on and off as the door opens and
closes and that the evaporator fan is running.
8. If necessary, adjust the height of the door using the
plastic spacer/washers on the bottom hinge pin.
CAUTION
If the freezer vibrates excessively when the
compressor is running, loosen (but do not remove)
the compressor bolts.
Remove the Bottom Shroud (applies only
to bottom mounted condenser units)
Loosen and remove the bottom shroud two top screws.
Slide the bottom shroud up and out.
Loading ...
Loading ...
Loading ...