Loading ...
Loading ...
Loading ...
13
SuperFreeze
SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control and
will make the compressor operate continuously. It is not necessary to adjust the thermostat setting
when using this function. When the function is selected, the SuperFreeze indicator (the dot at the
bottom right of the display) will be ON. The function can be turned off by pressing the key again and
the indicator will turn OFF. SuperFreeze will turn off automatically after 8 hours.
UP +
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN -
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display in Fahrenheit or Celsius degrees.
For freezers SCFF532D and SPFF51OS2D, to change the temperature from Fahrenheit to Celsius
or from Celsius to Fahrenheit, press and hold the SuperFreeze key for 5 seconds.
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light will
be on when a multi-key function is selected. To perform a multi-key function, touch and hold the first
key, then touch the second key for at least 5 seconds and then release both keys.
Child Lock
If in 2 minutes or longer without touching any key, the child lock will be activated automatically. To
cancel the lock, touch the UP and DOWN keys at the same time for at least 5 seconds and the
indicator light will flash three times to confirm the action.
Setting the Temperature Control
• You can set the temperature by pressing the UP and DOWN keys. When you press either of the
two keys for the first time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 0°F or -18°C.)
• The temperature you are setting will increase by one degree each time you press the UP key,
and will decrease by one degree each time you press the DOWN key.
• The range of set temperatures is from -11°F to 11°F.
• To view the set temperature at any time, press the UP or DOWN key. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.
Loading ...
Loading ...
Loading ...