Loading ...
Loading ...
Loading ...
Istruzioni per l’utente
29
SELF CLEAN (if present)
Dishwasher cleaning cycle. The cycle should be started with the machine
empty, without dishes. It is recommended to run the program every 2-3
months, using special dishwasher detergents. The light flashes during
operation. At the end of the cycle it remains on and cycle lights 4 and 5
flash.
The display (if available) shows “End”.
“CHILD LOCK” OPTION
By pressing the indicated buttons (3) at the same time, the controls are
locked, which is confirmed by the flashing ON/OFF (1) warning light. This
option stays active (and the warning light keeps flashing) until the buttons
(3) are pressed again.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
If the manufacturer's instructions and recommendations are
followed, washing the same number of similarly soiled dishes in a
dishwasher consumes less water and energy than if they were
washed by hand.
Always use the dishwasher with a full load.
Load the dishwasher as indicated in the instructions manual. If the
dishwasher is loaded incorrectly, it may lead to poor results as well
as waste water, energy and detergent.
Do not wash dishes under running water before placing them in the
dishwasher. It would just waste water and energy.
Use the washing program that is most appropriate for each type of
load.
If available, connect the dishwasher to a hot water supply up to
60°C.If the manufacturer's instructions and recommendations are
followed, washing the same number of similarly soiled dishes in a
dishwasher consumes less water and energy than if they were
washed by hand.
Loading ...
Loading ...
Loading ...