Loading ...
Loading ...
Loading ...
Setting Warm Zone
Controls 0fequipped)
use the warm zone to keep cooked]
foods hot such as: vegetables, gravies,/
casseroles, soups, stews, breads,|
pastries and oven-safe dinner plates. /
OFF
HI
MED
WARM & SERVE
ZONE
O
Warm Zone Recommended Food
Settings Chart
Food Item Heating
Level
Breads/Pastries LO
Casseroles LO
Dinner Plates with Food LO
Eggs LO
Gravies LO
Meats MED
Sauces MED
Soups (cream) MED
Stews MED
Vegetables MED
Fried Foods HI
Hot Beverages HI
Soups (liquid) HI
To Operate the Warm Zone
The purpose of the warm zone is to keep hot cooked foods at serving
temperature, Always start with hot food, It isnot recommended to heat cold
food on the warm zone,
All food placed on the warm zone should be covered with a lid or aluminum
foil to maintain quality. For best results, when warming pastries or breads, the
cover should have an opening to allow moisture to escape. Do not use plastic
wrap to cover food. Plastic may melt onto the surface and be very difficult
to clean.
Useonlydishware, utensilsand cookware recommended for oven and cooktop
use on the warm zone.
Unlike the surface elements, the warm zone will not glow red
when it is hot.
Always use potholders or oven mitts when removing food from
the warm zone as cookware and plates will be hot.
To Set the Warm Zone Control
1. To set the control, push in and turn the knob. The temperatures are
approximate, and are designated by H!, MED and LO. However, the control
can be set at any position between HI and LO for different levels of heating.
2. When done, turn the control to OFF. The warm zone will remain warm until
the hot surface indicator light goes off.
Temperature Selection
Refer to the chart in the side column for recommended heating levels. If a
particular food isnot listed, start with the medium level, and adjust as needed.
Most foods can be kept at serving temperatures by using the medium level.
Indicator Lights
The surface indicator light is located below the warm zone control. It turns
on when the control isset, and stays on until the control isturned off. The hot
surface indicator light, located under the glass cooktop or on the control
panel, will come on when the control isset and wilt continue to glow until the
glass cooktop has cooled down to a moderate level.
Hot Surface Surface
Indicator Light\ Indicator
.................
/
Warm & Serve Zone Warm & Serve Zone Control
Loading ...
Loading ...
Loading ...