Loading ...
Loading ...
Loading ...
– 12 –
8. ASSEMBLING THE HEATER
8.1 HANDLE (04174) – FIG.1
− Align the holes in the upper housing with the
two holes in the handle.
− Insert and tighten screws securely with
screw driver.
8.2 WHEEL AND HANDLE (04175 &
04176) – FIG.2
− Slide axle (6) through wheel support frame
(8). Install wheel spacers (5) if provided.
Install wheels (4) on axle (6).
− IMPORTANT: When installing wheels (4),
point extended hub of wheels toward wheel
support frame (8). Secure wheels onto axle
using split pins.
− Place cap nuts (7) on axle ends. Gently tap
with hammer to secure.
− Place heater on wheel support frame (8).
Line up holes on fuel tank flange with holes
on wheel support frame (8).
− Place handle(s) on top of fuel tank flange.
Insert screws (1) through handle(s) (9), fuel
tank flange, and wheel support frame (8).
Attach nut finger tight after each screw
is inserted.
− After all screws are inserted, tighten nuts firmly.
1
2
FIG.
FIG.
(3)
(2)
(5)
(4)
(6) (7)
(9)
(8)
(1)
Loading ...
Loading ...
Loading ...