Loading ...
Loading ...
Loading ...
Loading and using the dryer.
Always follow the fabric manufacturer's care label when laundering.
Sorting and Loading Hints
Asa general rule,if clothes are sorted properly for the Do not overload. Thiswastes energy and causes
washer,they are sorted properly for the dryer, wrinkling.
Donot add fabric softener sheets oncethe load has
become warm. They may cause fabric softener stains.
Bounce®Fabric Conditioner DryerSheets have been
approved for use in all GEDryerswhen used in
accordance with the manufacturer's instructions.
Do not dry the following items: fiberglass items,
woolens, rubber-coated items, plastics,items with
plastictrim and foam-filled items.
| 68
Careand Cleaningof the Dryer
TheExterion Wipe or dust any spillsor washing
compounds with a dump cloth. Dryer control
panel and finishes may be damaged bysome laundry
pretreatment soiland stain remover products. Apply
these products away from the dryer.Thefabric may
then be washed and dried normally. Damage to your
dryer caused by these products isnot covered by
your warranty.
TheLint Filten Cleanthe lint filter before each
use. Moistenyour fingers and reach into the filter
opening. Runyour fingers acrossthe filter.Havea
qualifiedtechnician vacuum the lintfrom the dryer
once a year.
/
Stainless Steel:To clean stainless steel surfaces,
use a damp cloth with a mild, non-abrasive cleaner
suitable for stainless steel surfaces. Removethe
cleaner residue, and then dry with a clean cloth.
TheExhaust Duct: Inspectand cleanthe exhaust
ducting at least once a year to prevent clogging.
A partially clogged exhaust can lengthen the
drying time.
Follow these steps:
[_ Turn off electrical supply by disconnecting the
plug from the wall socket.
-2---]Disconnectthe duct from the dryer.
[_---1Vacuum the duct with the hoseattachment and
reconnect the duct.
TheExhaust Hood: Checkfrom the outside that the
flaps ofthe hood move freely when operating. Make
surethat there isnot wildlife (birds,insects,etc.)nesting
insidethe duct or hood.
10
Loading ...
Loading ...
Loading ...